14.The failing system board must be returned with a microprocessor socket cover to protect the pins during shipping and handling. Install the microprocessor socket cover removed from the new system board on the failing system board. To install a microprocessor socket cover:
a.Release the lever securing the microprocessor retainer and open the retainer to access the microprocessor.
b.Grasp the microprocessor on the sides and lift it straight up and out of the socket. Do not touch the contacts on the microprocessor socket.
c.Align the notches 1 of the microprocessor socket cover with the alignment keys 2 of the microprocessor socket. Lower the socket cover straight down into the microprocessor socket on the system board.
Note: Your microprocessor socket and cover might look slightly different from the illustration.
d. Carefully press the socket cover straight downwards until it is secured into the socket.
e.Lower the microprocessor retainer and then lower the lever to secure the retainer. Make sure the lever is securely locked into position.
15.If you are instructed to return the failing system board, follow all packaging instructions, and use any packaging materials that are supplied to you for shipping.