This section provides instructions on how to install the Ethernet card and how to install the Ethernet card driver on Windows operating systems. Use any documentation that came with the Ethernet card and follow those instructions in addition to the instructions in this section.
To install the Ethernet card, do the following:
1.Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the server.
2.Remove the server cover. See “Removing the server cover” on page 43.
3.Lay the server on its side for easier operation.
4.Touch the
5.The Ethernet card is a kind of PCI card. See “Installing a PCI card” on page 73 and follow those instructions to install the Ethernet card.
6.To complete the installation, go to “Completing the parts replacement” on page 122.
On Linux operating systems, you do not need to install any device driver for the Ethernet card; on Windows operating systems, you need to install the device driver for the Ethernet card. To install the device driver on Windows operating systems, do the following:
1.Save any open documents and exit all applications.
2.Insert the ThinkServer EasyStartup DVD that came with your server into the DVD drive. Note: You do not need to use the driver disc that came with the Ethernet card.
3.
4.On the Hardware tab, click the Device Manager button. The Device Manager window opens.
5.Expand the Network adapters and then
6.Select Update Driver.... The Hardware Update Wizard program opens.
7.Select Install the software automatically (Recommended) and click Next to continue.
8.Follow the instructions on the screen.
Removing the Ethernet card
Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and “Guidelines” on page 39. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to remove the Ethernet card. Use any documentation that came with the Ethernet card and follow those instructions in addition to the instructions in this section.
To remove the Ethernet card, do the following:
1.Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the server.
2.Remove the server cover. See “Removing the server cover” on page 43.
3.Lay the server on its side for easier operation.
4.The Ethernet card is a kind of PCI card. See “Removing a PCI card” on page 74 and follow those instructions to remove the Ethernet card.