Chapter 5. Replacing FRUs
This chapter provides detailed instructions for replacing FRUs in the server.
FRU replacements are to be done only by trained service technicians.
This chapter does not contain the remove or replace procedure for all FRUs. Only the major FRUs are documented.
Guidelines
This section provides some guidelines that you should read and understand before using your server.
Basic guidelines
Before you use the server, be sure to read and understand the following guidelines:
•Be sure to read and understand the Safety Information and the Warranty and Support Information on the ThinkServer Documentation DVD that comes with your product, and “Guidelines” on page 39. These information will help you work safely. To obtain a copy of the publications, go to: http://www.lenovo.com/support
•When you install your new server, take the opportunity to download and apply the most recent firmware updates. This step will help to ensure that any known issues are addressed and that your server is ready to function at maximum levels of performance. To download firmware updates for your server, do the following:
1.Go to http://www.lenovo.com/support.
2.Click Download & Drivers ➙ ThinkServer and then follow the instructions on the Web page to download firmware updates for your server.
•Before you install optional hardware devices, make sure that the server is working correctly. If an operating system is installed, turn on the server and make sure that the operating system starts. If no operating system is installed, make sure that a 19990305 error code is displayed, indicating that an operating system was not found but the server is working correctly. If the server is not working correctly, refer to the chapter Chapter 3 “Diagnostics” on page 15 for detailed diagnostic information.
•Observe good housekeeping in the area where you are working. Put removed covers and other parts in a safe place.
•If you must turn on the server while the server cover is removed, make sure that no one is near the server and that no tools or other objects have been left inside the server.
•Do not attempt to lift an object that you think is too heavy for you. If you have to lift a heavy object, observe the following precautions:
–Make sure that you can stand safely without slipping.
–Distribute the weight of the object equally between your feet.
–Use a slow lifting force. Never move suddenly or twist when you lift a heavy object.
–To avoid straining the muscles in your back, lift by standing or by pushing up with your leg muscles.
•Make sure that you have an adequate number of properly grounded electrical outlets for the server, monitor, and other devices.
•Back up all important data before you make changes to drives.
•Have a small
© Copyright Lenovo 2010, 2011 | 39 |