3.Remove the front bezel by releasing the three plastic tabs bezel outward.
1
on the left side and pulling the front
Figure 13. Removing the front bezel
4.To reinstall the front bezel, align the other three plastic tabs on the right side of the front bezel with the corresponding holes in the chassis, then pivot the front bezel inward until it snaps into position on the left side.
5.Go to “Completing the parts replacement” on page 122.
Locking or unlocking the hard disk drive side door
Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and “Guidelines” on page 39. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to lock or unlock the hard disk drive side door.