Sanyo PLC-XU45 Polarized Glass-Out/Pre-Polarized Glass removal, Optical Unit Top removal

Optical Parts Disassemblies

mPolarized Glass-Out/Pre-Polarized Glass removal

1 Remove 4 screws A (M2.5x4) and take the LCD/Prism ass’y off upward from the optical unit.

2 Remove each screw B and take the glass off upward.

Note:

Do not replace the LCD panel separately otherwise it can not obtain proper picture.

A	A	LCD Panel/
A		Prism Ass’y

LCD Panel/Prism

Ass’y

Polarized Glass-Out

B

Optical filter

LCD Panel

* Glasses should be placed as the

film attached side comes to the Fig.7-2LCD panel side.

Fig.7-1

, Optical Unit Top removal

1 Remove 9 screws (M3x10) to take the Optical Unit Top off upward.

Optical Unit Top

Fig.8

-17-