Sanyo PLC-XU45 service manual Electrical Parts List, Read Description in the parts list

■ Electrical Parts List

ME3-XU4500, MF3-XU4600

Product safety should be considered when a component replacement is made in any area of a projector. Components indicated by a ! mark in this parts list and the circuit diagram show components whose value have spe- cial significance to product safety. It is particularly recommended that only parts specified on the following parts list be used for components replacement pointed out by the mark.

●Read Description in the parts list

Read description in the Capacitor and Resistor as follows:

CAPACITOR CERAMIC 100P K 50V

					Rated Voltage
			Tolerance Symbols:
			Less than 10pF	B : ±0.1pF		C : ±0.25pF
			A : Not specified
			D : ±0.5pF	E : +0 -1pF		F : ±1PF
			G : ±2pF	H : +0.1 -0pF		L : +0 -0.1pF
			R : ±0.25 -0pF S : +0-0.25pF
			More than 10pF
			A : Not specified	B : ±0.1%		C : ±0.25%
			D : ±0.5%	F : ±1%		G : ±2%
			H : ±3%	J : ±5%		K : ±10%
			L : ±15%	M : ±20%		N : ±30%
			P : +100-0%	Q : +30-10%		T : +50-10%
			U : +75-10%	V : +20-10%		W : +100-10%
			X : +40-20%	Y : +150-10%		Z : +80-20%
		Rated value: P=pico farad, U=micro farad
Material:
CERAMIC	Ceramic
MT-PAPER	Metallized Paper
POLYESTER	Polyester
MT-POLYEST	Metallized Polyester
POLYPRO	Polypropylene
MT-POLYPRO....	Metallized Polypropylene
COMPO FILM	Composite film
MT-COMPO	Metallized Composite
STYRENE	Styrene
TA-SOLID	Tantalum Oxide Solid Electrolytic
AL-SOLID	Aluminium Solid Electrolytic
ELECT	Aluminum Foil Electrolytic
NP-ELECT	Non-polarised Electrolytic
OS-SOLID	Aluminium Solid with Organic Semiconductive Electrolytic
POS-SOLID	Polymerized Organic Semiconductive
DL-ELECT	Double Layered Electrolytic
PPS-FILM	Polyphenylene Sulfide Film
MT-PPS-FILM	Metalized Polyphenylene Sulfide Film
MT-PEN-FILM	Metalized Polyethylenenaphthalate Film
CAPACITOR	Other

RESISTOR CARBON 4.7K J A 1/4W

Rated Wattage

Performance Symbols:

A:General B: Non flammable Z: Low noise Other: Temperature coefficient

T: ±10ppm/°C	U: ±25ppm/°C	C: ±50ppm/°C
D: ±100ppm/°C	E: ±200ppm/°C	F: ±250ppm/°C
G: ±350ppm/°C	H: ±1000ppm/°C±10%	W: ±1200ppm/°C±10%

Y:±1400ppm/°C±10% J: ±2000ppm/°C±10% K: ±2400ppm/°C±10%

L:±2700ppm/°C±10% M: ±3000ppm/°C±10% N: ±3300ppm/°C±10%

P:±3600ppm/°C±10% Q: ±3900ppm/°C±10% R: ±4200ppm/°C±10%

S:±4300ppm/°C±10% V: ±4500ppm/°C±10% X: ±8000ppm/°C±10%

			Tolerance Symbols:
			A: ±0.05% B: ±0.1% C: ±0.25% D: ±0.5%
			F: ±1%	G: ±2% J: ±5% K: ±10%
			M: ±20%	P: +5-15% Z: 0 ohm
		Rated value, ohms:
Material:		K: 1,000, M: 1,000,000
CARBON	Carbon
MT-FILM	Metal Film
OXIDE-MT	Oxide Metal Film
SOLID	Composition
MT-GLAZE	Metal Glaze
WIRE WOUND...	Wire Wound
CERAMIC RES.. Ceramic
FUSIBLE RES....	Fusible
RESISTOR	Other

-55-