Sanyo PLC-XU45 service manual Group 10 Option, Fan Control, Group 500 ADC, Group 510 Ntsc Gakaku

Electrical Adjustments

No.	Adjustment Item	Initial Value	Range	Input source / Description
2	LP05_B_GAIN	128	0 ~ 255
3	TURBO_GAIN	19	0 ~ 255
Group: 10 Option
0	Lamp Time Monitor	-	-	Read only
1	RS232C Baudrate	0	0 ~ 1	0: 19200bps 1: 9600bps
2	Shootout Mode	0	0 ~ 2	1:Mode-1(change when no signal) 2:Mode-2(AV-priority) 0: Disable
3	Cooling Time	3	0 ~ 15	Cooling time periods 1: 30 sec. 3: 90sec.15: 450sec. 0: continuos-on
4	Hi-Land SW	0	0 ~ 1	0:Normal mode(Normal operation) 1:Highland mode (Fan max speed)
5	V-Douki SW	0	0 ~ 1	0: V-sync 1:no V-sync
6	Color Shading SW	1	0 ~ 1	Color shading correction 0: On 1: Off Not memorized
7	MCI Output Auto	1	0 ~ 1	1: Auto for output from MCI 0: Fixed output to Panel size
8	Keystone Option	0	0 ~ 1	0: Fixed Limitation 1: Vary limitation at Input
9	Syukka SW	0	0 ~ 10	Reset control values when this value reaches 10.
10	Power Fail Monitor	0	0 ~ 10	Read only
11	MUPO Option	0	0 ~ 4	0: 90ºC1: 53ºC 2: 37ºC: 28ºC 4: 13ºC
Group: 11	Fan Control
0	Fan Speed Mode	0	0 ~ 3	0:FanControl-On 1:min 2:Mid 3:Max Adjustable but not memorized	✻ Fan Control Adjustment
1	Fan-1 Min Data	44	0 ~ 127	Decides minimum output data at fan control.	✻ Fan Control Adjustment
2	Fan-2 Min Data	63	0 ~ 127	Decides minimum output data at fan control.	✻ Fan Control Adjustment
3	Fan-1 Max Data	217	128 ~ 255	Decides maximum output data at fan control.	✻ Fan Control Adjustment
4	Fan-2 Max Data	236	128 ~ 255	Decides maximum output data at fan control.	✻ Fan Control Adjustment
5	Temp Low	37	10 ~ 80	Data to decide the DAC output for Temp.
6	Temp High	45	30 ~ 80	Compensates linearly DAC min. at the value of Temp Low and DAC max. at the Temp High.
7	Fan-1 Temp Error	56	30 ~ 80	Temperature to judge the abnormal temp. for cabinet, optical and Man unit.
8	Fan-2 Temp Error	48	30 ~ 80	Temperature to judge the abnormal temp. for external temp and other unit.
9	Fan-1 Speed Monitor	-	0 ~ 255	Read only (cabinet, optical, Man unit)
10	Fan-2 Speed Monitor	-	0 ~ 255	Read only (External temp, other unit)
11	Temp Monitor	-	0 ~ 9999	Read only, upper 2 bytes for Fan-1 and lower 2 types for Fan-2.
12	Eco Mode Fan-1 Min Data	229/229	0 ~ 255	Eco Mode Deferential value from standard(0: ±0, 1:+1, 255:-1)
13	Eco Mode Fan-2 Min Data	229/197	0 ~ 255	*Depending on the type of lamp. (Osram/Philips)
14	Eco Mode Fan-1 Max Data	182/182	0 ~ 255
15	Eco Mode Fan-2 Max Data	182/182	0 ~ 255
Group: 12 PC Real / AV Cinema
0	PC Real Contrast	32	0 ~ 63
1	PC Real Brightness	32	0 ~ 63
2	PC Real Red	32	0 ~ 63
3	PC Real Green	32	0 ~ 63
4	PC Real Blue	32	0 ~ 63
5	PC Real Gamma	8	0 ~ 15
6	AV Cinema Contrast	32	0 ~ 63
7	AV Cinema Brightness	32	0 ~ 63
8	AV Cinema Color	32	0 ~ 63
9	AV Cinema Tint	32	0 ~ 63
10	AV Cinema Red	32	0 ~ 63
11	AV Cinema Green	32	0 ~ 63
12	AV Cinema Blue	32	0 ~ 63
13	AV Cinema Sharpness	15	0 ~ 31
14	AV Cinema Gamma	8	0 ~ 15
Group: 500 ADC
0	ADC R-OFFSET	128	0 ~ 255
1	ADC G-OFFSET	128	0 ~ 255
2	ADC B-OFFSET	128	0 ~ 255
3	ADC R-GAIN	254	0 ~ 255
4	ADC G-GAIN	254	0 ~ 255
5	ADC B-GAIN	254	0 ~ 255
6	ADC BandWidth PC	3	0 ~ 3
7	ADC BandWidth AV	3	0 ~ 3
Group: 510 NTSC Gakaku
0	NTSC TOTAL DOTS	2626	0 ~ 2047
1	NTSC DISP DOTS	1024	0 ~ 2047
2	NTSC H BACK PORCTH	230	0 ~ 2047
3	NTSC V BACK PORCTH	46	0 ~ 2047
4	NTSC DISP LINE	456	0 ~ 2047
5	NTSC CLAMP	4	0 ~ 2047
Group: 511 PAL Gakaku
0	PAL TOTAL DOTS	2694	0 ~ 2047
1	PAL DISP DOTS	1024	0 ~ 2047
2	PAL H BACK PORCTH	266	0 ~ 2047
3	PAL V BACK PORCTH	62	0 ~ 2047
4	PAL DISP LINE	533	0 ~ 2047
5	PAL CLAMP	4	0 ~ 2047
Group: 512 HDTV 1080i-60 Gakaku
0	TOTAL DOTS	1206	0 ~ 2047
1	DISP DOTS	1024	0 ~ 2047
2	H BACK PORCTH	145	0 ~ 2047

-32-