Sanyo PLC-XU 101K owner manual Part Names and Functions Rear Terminal

Part Names and Functions

Rear Terminal

q w e r

t y u i o

qSERVICE PORT

This jack is used to service the projector.

wCOMPUTER IN 2/COMPONENT IN

Connect the computer or component video (or RGB Scart) output signal to this terminal.

Use the supplied VGA cable or a Component-VGA cable (not supplied).

eMONITOR OUT

This terminal can be used to output the incoming signal from COMPUTER IN 1 terminal or COMPUTER IN 2/COMPONENT IN terminal to the other monitor (pp.15, 17).

rCOMPUTER IN 1

Connect the computer output to this terminal (p.15).

tVIDEO IN

Connect the composite video output signal to this jack (p.16).

yAUDIO IN

Connect the audio output signal from video equipment connected to t or o to this jack. For a mono audio signal (a single audio jack), connect it to the L (MONO) jack (p.16).

uCOMPUTER/COMPONENT AUDIO IN Connect the audio output (stereo) signal from a computer or video equipment connected to w or r to this jack (pp.15, 17).

iAUDIO OUT (VARIABLE)

Connect an external audio amplifier to this jack (pp.15–17).

This terminal outputs sound from AUDIO IN terminal (y or u).

oS-VIDEO IN

Connect the S-VIDEO output signal from video equipment to this jack (p.16).

10