Sanyo PLC-XU 101K Input Source Selection Component, RGB Scart 21-pin, Video Input, Top Control

Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation Top Control

Choose Computer 2 by pressing the COMPUTER 2 button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

COMPUTER 2 button

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Press the Point 78 buttons to move the red
	frame pointer to the Input Menu icon.
2	Press the Point ed buttons to move the red arrow
	pointer to Computer 2 and then press the SELECT
	button.
3	After the Source Select Menu appeared for Computer
	2, move the pointer to Component or RGB(Scart) and
	then press the SELECT button.
		When the input source is coming from video
Component
		equipment connected to the COMPUTER IN
		2 / COMPONENT IN terminal with a
		Component-VGA Cable, select Component.

REMOTE CONTROL

COMPUTER button

Computer 1

Computer 2

Input Menu Input Menu icon

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Source Select Menu

Move the pointer to Component or RGB(Scart) and press the SELECT button.

RGB (Scart)

When the input source is coming from video equipment connected to the COMPUTER IN 2 / COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

✔Note:

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.45).

36