Video Input
Sharpness
Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).
Gamma
Use the Point 78 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select one of the following options to get smoother images.
Off | Disabled. |
L1 | Lower reduction |
L2 | Higher reduction |
Progressive
An interlaced video signal can be displayed in progressive mode. Select one of the following options.
Off | Disabled. |
L1 | For an active picture. |
L2 | For a still picture. |
Film | For watching a film. With this function, the |
| projector reproduces pictures faithful to the |
| original film quality. |
Reset
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the SELECT button. Use the point ed buttons to select one from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored data can be called up by selecting "Image
Quit
Exit the Image Adjust Menu.
✔Notes:
•Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected. (p.37)
•Reset and Store icons will be displayed when any adjustment is made.
Store icon
Image Mode Menu Move the red frame pointer to an image item to be set and then press the SELECT button.
A confirmation box appears and then select [Yes].
40