Sanyo PLC-XU 101K owner manual Cinema, Image Remote Control, Image1-4

Video Input

Image Mode Selection

Direct Operation

Select the desired image mode from among Dynamic, Standard, Cinema, Blackboard (Green), Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control.

Dynamic

For viewing pictures in a bright room.

Standard

Normal picture mode preset on the projector.

Cinema

Picture mode adjusted with fine tone.

Blackboard (Green)

For the image projected on a blackboard.

This mode help enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.

Image 1–4

Remote Control

IMAGE button

IMAGE button

Dynamic

Standard

Cinema

Blackboard(Green)

Image 1

Image 2

Image 3

Image 4

For viewing with the user preset image mode in the Image Adjust Menu (see page 39–40). This Image memory is provided in each computer, component, and video input source.

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 78 buttons to move the red
	frame pointer to the Image Select Menu icon.
2	Use the Point ed buttons to move the red frame
	pointer to the desired image mode and then press the

SELECT button.

Dynamic

For viewing pictures in a bright room.

Standard

Normal picture mode preset on the projector.

Cinema

Picture mode adjusted with fine tone.

Blackboard(Green)

For the image projected on a blackboard. See above for further description.

Image1–4

For viewing with the user preset image mode in the Image Adjust Menu (see page 39–40).

Image Select

Menu icon

Image Select Menu

Move the red frame pointer to a mode and press the SELECT button.

The selected image mode is check marked.

38