Sanyo PLC-XU 101K owner manual Setting

Setting

Setting

This projector has Setting menu that allows you to set up the other various functions described as follows;

1	Press the MENU button	to display the On-Screen
	Menu. Press the Point 7	8 buttons to move the red
	frame pointer to the Setting Menu icon.
2	Press the Point ed buttons to move the red frame
	pointer to the item that you want to set and then press

the SELECT button. The Setting dialog box appears.

Language

The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, or Japanese.

Keystone

This function corrects distortion of a projected image. Select either Store or Reset with the Point 7 8 buttons, and then press the SELECT button. The keystone dialog box will appear. Correct keystone with the Point ed buttons. (p.24)

Store .........store the keystone correction even when the

AC power cord is unplugged.

Reset ........reset the keystone correction when the AC

power cord is unplugged.

Blue back

Press the Point 7 8 buttons to switch On/Off. When this function is “On,” a blue image is displayed while the input signal is not detected.

Display

Press the Point 7 8 buttons to switch On/Off. This function decides to display On-Screen Displays.

On .........................Show all the On-Screen Displays. Use

this function when you want to project images after the lamp becomes bright enough. Factory default setting is this mode.

Countdown off ......Show the input image instead of the

countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.

Off .........................Do not show On-Screen Displays.

except;

●On-Screen Menu

●“Power off?” message

●P-Timer

●“No signal” message for Power management item (p46)

●”Please wait...” message

●White arrows for True item in the Screen Menu (p33)

Setting Menu (Language)

Set the red frame	Setting Menu
pointer to the item	icon
and press the
SELECT button.

Press the SELECT button at

Language item, the

Language Menu will appear.

Press the SELECT button at this item to display the other languages.

Press the SELECT button at this item to close the dialog box.

42