Sanyo PLC-XU 101K owner manual Video Input, Input Source Selection Video, S-Video

Video Input

Input Source Selection (Video, S-Video)

Direct Operation	Top Control
Choose Video by pressing the VIDEO button on the top	VIDEO button
control or the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.

REMOTE CONTROL

VIDEO button

Menu Operation		Input Menu icon
		Input Menu
1	Press the MENU button to display the On-Screen
	Menu. Press the Point 78 buttons to move the red	Move	the	pointer	to
	frame pointer to the Input Menu icon.
		Video	and	press	the
		SELECT button.

2	Press the Point ed buttons to move the red arrow
	pointer to Video and then press the SELECT button to
	display the Source Select Menu .
3	Move the pointer to the desired source and then press
	the SELECT button.
		When selecting Auto, the projector automatically
	Auto
		detects incoming video signal, and adjusts itself
		to optimize its performance. The projector
		selects connection in the following order:
		1. S-Video
		2. Video
		When video input signal is connected to the
	Video
		VIDEO jack, select Video.
		When video input signal is connected to the S-
S-Video
		VIDEO jack, select S-Video.

VIDEO

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SELECT button.

✔Note:

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.45).

35