Sanyo PLC-EF60A, PLC-XF60A, Multimedia Projector owner manual Turning Off the Projector

Page 28

Basic Operation

Turning Off the Projector

1	Press the POWER ON-OFF button on the top control or the
	remote control, and a message “Power off?” appears on the
	screen.
2	Press the POWER ON-OFF button again to turn off the


	projector. The LAMP indicator brightly lights red and the
	READY indicator goes out. After approximately 90 seconds,
	the READY indicator will light green again and then the
	projector can be turned on by pressing the POWER ON-OFF	The message disappears after 4 seconds.
	button.
3	The Cooling fans operate for approximately 2 minutes after
	the projector is turned off; keep operating more 30 seconds

after the READY indicator lights green. To power down the projector completely, turn off the MAIN On/Off switch and disconnect the AC Power Cord.

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN

PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE

TURNING IT OFF.

DO NOT DISCONNECT AC POWER CORD WHILE

COOLING FANS ARE RUNNING OR BEFORE POWER

INDICATOR LIGHTS RED. OTHERWISE IT WILL

RESULT IN SHORTENING LAMP LIFE.

✔Note:

•The projector cannot be turned on for about 90 seconds after turned off. You can turn it on again after the READY indicator lights green.

•When the On start function is on, this projector is turned on automatically by connecting the AC power cord to an AC outlet. (See page 52 for the On start function.)

•Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and give it a rest about an hour in every 24 hours.

•This projector monitors internal temperature and automatically controls the running speed of the cooling fans.

•If the WARNING TEMP indicator blinks red or all the indicators except the LAMP indicator are blinking, see “Warning Temp Indicator” on page 60.

•When “Power management” mode is Ready or Shut down, projector detects signal interruption and turns off the Projection Lamp automatically after the set time has passed. Refer to “Power management” on page 52.

28

Image 28

Contents Model PLC-XF60A PLC-EF60A Features and Design Compatibility My Menu SelectionTable of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSetup In Proper Directions Positioning PrecautionsAir Circulation Bottom Front Downward Upward UsualMoving the Projector USE Caution in Carrying or Transporting the ProjectorCompliance Federal Communication Commission NoticePreparation Parts NameFront BackIndicators Top Control Terminals Input 2 terminalsUSB Series B C JackUSB Serial Port OUTRemote Control About Control PadTimer button 4REMOTE RESET/ON/ALL-OFF switchFreeze button CH buttonRemote Control Channel and ID Setup Remote Control TransmitterWired Remote Control Transmitter Remote Control Channel & Frequency Remote Control Battery InstallationRemote Control ID Installation InstallationLens Installation Positioning the ProjectorLevel Adjustable Feet Lens Shift AdjustmentAdjustable feet 200 240 V AC Connecting AC Power CordGround Interface Board Slots Connection TerminalsOption Control No Connecting to Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Digital and Video Connecting to Video Equipment Component and RGB Scart Wireless Remote Control Operation Basic OperationOperating the Projector Mouse OperationBasic Operation and Reference Buttons Top Control Remote ControlPad Turning On the Projector What is PIN code?Enter a PJ PIN code Turning Off the Projector Zoom and Focus Adjustment Remote ControlShutter Function Top ControlInput Selection Auto PC AdjustmentInformation Keystone Adjustment Timer FunctionScreen Selection Picture Freeze FunctionZoom + Zoom +/- FunctionZoom How to Operate On-Screen Menu Remote Control OperationTop Control Operation Mouse OperationMenu icon Guide Control bar for Mouse OperationMouse cursor Item dataMenu Icons and Their Features Menu icons What You Can Do with Each MenuInput InputRGB Scart When the input source is analog coming When video input signal is connected toWhen the input source is component Move a pointer to Input 2 and press the Select buttonSystem SystemPC System Selection AutoVideo or S-Video Signal Selection Component Signal SelectionAV System Menu Video or S-Video AV System Menu ComponentComputer Adjustment PC AdjustmentAuto PC Adjust Auto PC adjManual PC Adjust Sync phase ResetPosition ModeImage Adjustment ImageFor PC Input For AV InputImage Adjust Auto picture control Color tempRed GreenGamma Noise reductionProgressive FilmScreen Setting Screen SettingScreen Zoom KeystoneCeiling RearSetting SettingLanguage MenuLogo Enter a Logo PIN codeBackground LampPower management Power managementDisplay Input searchLens memory Analog outShutter Shutter Management SecurityKey lock USB lockTo Change the PJ PIN Code setting To Change PJ PIN CodeFactory default Exits the Setting menuSpecial SpecialFan control FilterRS-232C Test patternUSB memory Exits Warning log menu InformationAll indicators except the Lamp indicator are blinking Maintenance and CleaningThen check the matters below Air Filter Replacement Filter cover Air filterReset the Lamp time Lamp ReplacementLamp Lamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection LensAttaching the Cord Cover Strap Indicators and Projector Condition Main IndicatorsProjector is OFF. The AC power cord is unplugged May cause electric shock or a fire hazardShutter Indicator Air filter is clogged with dust or has been used overtimeLamp 1/2 Lamp Replace IndicatorsUntil cooling is completed Troubleshooting AppendixWireless Remote Control Lens position moves when InputIs switched Some displays are not seenCompatible Computer Specifications Freq1080i/60 1080i/50Technical Specifications Accessories Optional PartsMenu Tree PIN code change Information Dimensions Terminal Configurations USB Connector Series BPIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Index NumericsAppendix Part No 327 9398 1AA6P1P5077-- KH6A