Sanyo PLC-EF60A, PLC-XF60A, Multimedia Projector Air Filter Replacement, Filter cover Air filter

Page 61

Maintenance and Cleaning

Air Filter Replacement

Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat build up and adversely affect the life of the projector. Proper maintenance should be taken.

WARNING FILTER Indicator

This projector can monitor the filter condition. When the filter is clogged with dust and the performance is degraded, the WARNING FILTER indicator lights orange and let you know the filter replacement is required.

If the indicator is lighting orange, turn off the projector and replace the air filter immediately.

Using the projector with the WARNING FILTER indicator lighting may result in internal heat build up and cause damage to the optical elements inside the projector. The projector will shutdown automatically to protect itself when the projector's inside temperature is abnormally high.

1

Turn off the projector, and disconnect the AC power cord

 

from the AC outlet.

2

Pull down the tabs on both sides top of the filter cover and

 

open the projector cover.

3

Pull out the air filter from the projector.

4

Replace the new air filter and the filter cover properly onto

 

the projector.

5

Reset the Filter time. See “Filter” in the Special menu on

 

page 57.

CAUTION

Do not operate a projector with Air Filter removed. Dust may accumulate on LCD Panel and Mirror degrading picture quality.

Do not put small parts into Air Intake Vents. It may result in malfunction of a projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality.

When using under dusty or smoky conditions, dust may accumulate on liquid crystal panel, lens, or optical elements inside it. This condition may degrade quality of projected image.

When above symptoms are noticed, contact your authorized dealer or service station for proper cleaning.

TOP CONTROL

WARNING FILTER lights orange

Filter cover

Air filter

Note:

The projector cannot be operated with the air filter removed; it will shut down automatically if the air filter is removed while the projector is operating.

Used in a place where the air pressure is relatively low such as highlands, the WARNING FILTER indicator may light orange even the air filter is clean.

Maintenance & Cleaning

ORDER REPLACEMENT FILTER

When ordering the replacement air filter, give the following information to the dealer.

Model No. of your projector

:

PLC-XF60A / PLC-EF60A

Replacement Filter Part No.

:

610 315 1588

61

Image 61
Contents Model PLC-XF60A PLC-EF60A Compatibility My Menu Selection Features and DesignTable of Contents Risk of Electric Shock Do not Open To The OwnerVoor de klanten in Nederland Safety InstructionsPositioning Precautions Setup In Proper DirectionsAir Circulation Bottom Front Downward Upward UsualUSE Caution in Carrying or Transporting the Projector Moving the ProjectorFederal Communication Commission Notice ComplianceParts Name PreparationFront BackIndicators Top Control Input 2 terminals TerminalsC Jack USB Series BUSB Serial Port OUTAbout Control Pad Remote Control4REMOTE RESET/ON/ALL-OFF switch Timer buttonFreeze button CH buttonRemote Control Channel and ID Setup Remote Control TransmitterWired Remote Control Transmitter Remote Control Channel & Frequency Remote Control Battery InstallationRemote Control ID Installation InstallationLens Installation Positioning the ProjectorLevel Adjustable Feet Lens Shift AdjustmentAdjustable feet 200 240 V AC Connecting AC Power CordGround Interface Board Slots Connection TerminalsOption Control No Cables used for connection Connecting to Computer Digital and Analog RGBConnecting to Video Equipment Digital and Video Connecting to Video Equipment Component and RGB Scart Basic Operation Wireless Remote Control OperationOperating the Projector Mouse OperationBasic Operation and Reference Buttons Top Control Remote ControlPad Turning On the Projector What is PIN code?Enter a PJ PIN code Turning Off the Projector Remote Control Zoom and Focus AdjustmentShutter Function Top ControlInput Selection Auto PC AdjustmentInformation Timer Function Keystone AdjustmentScreen Selection Picture Freeze FunctionZoom + Zoom +/- FunctionZoom Remote Control Operation How to Operate On-Screen MenuTop Control Operation Mouse OperationControl bar for Mouse Operation Menu icon GuideMouse cursor Item dataMenu icons What You Can Do with Each Menu Menu Icons and Their FeaturesInput InputRGB Scart When video input signal is connected to When the input source is analog comingWhen the input source is component Move a pointer to Input 2 and press the Select buttonSystem SystemPC System Selection AutoComponent Signal Selection Video or S-Video Signal SelectionAV System Menu Video or S-Video AV System Menu ComponentPC Adjustment Computer AdjustmentAuto PC Adjust Auto PC adjManual PC Adjust Reset Sync phasePosition ModeImage Image AdjustmentFor PC Input For AV InputImage Adjust Color temp Auto picture controlRed GreenNoise reduction GammaProgressive FilmScreen Setting Screen SettingScreen Keystone ZoomCeiling RearSetting SettingLanguage MenuEnter a Logo PIN code LogoLamp BackgroundPower management Power managementDisplay Input searchLens memory Analog outShutter Security Shutter ManagementKey lock USB lockTo Change PJ PIN Code To Change the PJ PIN Code settingExits the Setting menu Factory defaultSpecial SpecialFan control FilterRS-232C Test patternUSB memory Information Exits Warning log menuAll indicators except the Lamp indicator are blinking Maintenance and CleaningThen check the matters below Filter cover Air filter Air Filter ReplacementReset the Lamp time Lamp ReplacementLamp Lamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection LensAttaching the Cord Cover Strap Main Indicators Indicators and Projector ConditionProjector is OFF. The AC power cord is unplugged May cause electric shock or a fire hazardAir filter is clogged with dust or has been used overtime Shutter IndicatorLamp 1/2 Lamp Replace IndicatorsUntil cooling is completed Appendix TroubleshootingLens position moves when Input Wireless Remote ControlIs switched Some displays are not seenFreq Compatible Computer Specifications1080i/50 1080i/60Technical Specifications Optional Parts AccessoriesMenu Tree PIN code change Information Dimensions USB Connector Series B Terminal ConfigurationsPIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Numerics IndexAppendix Part No 327 9398 1AA6P1P5077-- KH6A