Sanyo PLC-EF60A, PLC-XF60A, Multimedia Projector To The Owner, Risk of Electric Shock Do not Open

Page 4

To The Owner

Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in better condition for a considerable time.

Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the end of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER’S MANUAL WITH THIS UNIT.

NOTE: This symbol mark and recycle system are applied only to EU countries and not applied to the countries in the other area of the world.

Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of- life, should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

Safety Precaution

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This projector produces intense light from the projection lens. Do not stare directly into the lens as much as possible. Eye damage could result. Be especially careful that children do not stare directly into the beam.

Install the projector in a proper position. If not, it may result in a fire hazard.

Provide appropriate space on the top, sides and rear of the projector cabinet for allowing air circulation and cooling the projector. Minimum clearances must be maintained. If the projector is to be built into a compartment or similarly enclosed, the minimum distances must be maintained. Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous.

SIDE and TOP

REAR

3.3' (1m)

3.3' (1m)

3.3' (1m)

3.3' (1m)

If the projector is not to be used for an extended time, unplug the projector from the power outlet.

CAUTION ON HANGING FROM THE CEILING

When hanging the projector from the ceiling, clean the air intake vents, air filters, and top of the projector periodically with a vacuum cleaner. If you leave the projector without cleaning for a long time, the dust will block the operation of the cooling function, and it may cause a breakdown or a disaster.

DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIORATED.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

4

Image 4
Contents Model PLC-XF60A PLC-EF60A Features and Design Compatibility My Menu SelectionTable of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSetup In Proper Directions Positioning PrecautionsAir Circulation Bottom Front Downward Upward UsualMoving the Projector USE Caution in Carrying or Transporting the ProjectorCompliance Federal Communication Commission NoticePreparation Parts NameFront BackIndicators Top Control Terminals Input 2 terminalsUSB Series B C JackUSB Serial Port OUTRemote Control About Control PadTimer button 4REMOTE RESET/ON/ALL-OFF switchFreeze button CH buttonRemote Control Channel and ID Setup Remote Control TransmitterWired Remote Control Transmitter Remote Control Channel & Frequency Remote Control Battery InstallationRemote Control ID Installation InstallationLens Installation Positioning the ProjectorLevel Adjustable Feet Lens Shift AdjustmentAdjustable feet 200 240 V AC Connecting AC Power CordGround Interface Board Slots Connection TerminalsOption Control No Connecting to Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Digital and Video Connecting to Video Equipment Component and RGB Scart Wireless Remote Control Operation Basic OperationOperating the Projector Mouse OperationBasic Operation and Reference Buttons Top Control Remote ControlPad Turning On the Projector What is PIN code?Enter a PJ PIN code Turning Off the Projector Zoom and Focus Adjustment Remote ControlShutter Function Top ControlInput Selection Auto PC AdjustmentInformation Keystone Adjustment Timer FunctionScreen Selection Picture Freeze FunctionZoom + Zoom +/- FunctionZoom How to Operate On-Screen Menu Remote Control OperationTop Control Operation Mouse OperationMenu icon Guide Control bar for Mouse OperationMouse cursor Item dataMenu Icons and Their Features Menu icons What You Can Do with Each MenuInput InputRGB Scart When the input source is analog coming When video input signal is connected toWhen the input source is component Move a pointer to Input 2 and press the Select buttonSystem SystemPC System Selection AutoVideo or S-Video Signal Selection Component Signal SelectionAV System Menu Video or S-Video AV System Menu ComponentComputer Adjustment PC AdjustmentAuto PC Adjust Auto PC adjManual PC Adjust Sync phase ResetPosition ModeImage Adjustment ImageFor PC Input For AV InputImage Adjust Auto picture control Color tempRed GreenGamma Noise reductionProgressive FilmScreen Setting Screen SettingScreen Zoom KeystoneCeiling RearSetting SettingLanguage MenuLogo Enter a Logo PIN codeBackground LampPower management Power managementDisplay Input searchLens memory Analog outShutter Shutter Management SecurityKey lock USB lockTo Change the PJ PIN Code setting To Change PJ PIN CodeFactory default Exits the Setting menuSpecial SpecialFan control FilterRS-232C Test patternUSB memory Exits Warning log menu InformationAll indicators except the Lamp indicator are blinking Maintenance and CleaningThen check the matters below Air Filter Replacement Filter cover Air filterReset the Lamp time Lamp ReplacementLamp Lamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection LensAttaching the Cord Cover Strap Indicators and Projector Condition Main IndicatorsProjector is OFF. The AC power cord is unplugged May cause electric shock or a fire hazardShutter Indicator Air filter is clogged with dust or has been used overtimeLamp 1/2 Lamp Replace IndicatorsUntil cooling is completed Troubleshooting AppendixWireless Remote Control Lens position moves when InputIs switched Some displays are not seenCompatible Computer Specifications Freq1080i/60 1080i/50Technical Specifications Accessories Optional PartsMenu Tree PIN code change Information Dimensions Terminal Configurations USB Connector Series BPIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Index NumericsAppendix Part No 327 9398 1AA6P1P5077-- KH6A