Sanyo PLC-ZM5000L owner manual Part Names and Functions Side Control and Indicators

Part Names and Functions

Side Control and Indicators

Side Control

①

②

③

④

⑤

Indicators (on the top panel)

⑧

⑨

⑦

⑩

⑪

⑥ ⑫

⑬

①ON/STAND-BY button

Turn the projector on or off (pp.23-24).

②MENU button

Open or close the On-Screen Menu (p.25).

③SELECT button

–Execute the selected item (p.25).

–Expand or compress the image in the Digital zoom mode (p.43).

④SHUTTER button

Close and open up the built-in shutter (p.27).

⑤Point ▲▼◄► ( VOLUME – / + ) buttons

–Select an item or adjust the value in the On-Screen Menu (p.25).

–Pan the image in Digital zoom + mode (p.43).

–Adjust the volume level (with Point ◄► buttons) (p.28).

⑥LENS button

Enter the focus, zoom, and lens shift adjustment mode (p.27).

⑦INPUT button

Select an input source (pp.33-35).

⑧POWER indicator

–Light green while the projector is in stand- by mode.

–Light green during operations.

–Blink green in the Power management mode (p.59).

⑨LAMP indicator

Light red during operations.

⑩WARNING TEMP.. indicator

Blink red when the internal temperature of the projector exceeds the operating range (pp.72, 79-80).

⑪WARNING FILTER indicator

–Blink slow when the filter is being scrolled (pp.66, 79).

–Blink fast when the filter scroll is not working properly or the filter cartridge is not installed (pp.66, 81).

–Light orange when the clogging of the filter is detected or the filter counter reaches

a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.65, 66, 81).

⑫SHUTTER indicator

Light blue when the shutter is closed (p.79).

⑬LAMP REPLACE indicator

Light orange when the projection lamp reaches its end of life (pp.69, 80).

12