Sanyo PLC-ZM5000L owner manual Projector is detecting abnormal condition, Lamp Replace

Appendix

The projector is detecting abnormal condition..

		Indicators				Projector Condition
POWER	LAMP	WARNING	WARNING	SHUTTER	LAMP
green	red	TEMP.	FILTER	blue	REPLACE
		red	orange		orange
	❖					The temperature inside the projector is elevated
						close to the abnormally high level.
						The temperature inside the projector is
						abnormally high. The projector cannot be turned
						on. When the projector is cooled down enough
	❖					and the temperature returns to normal, the
						POWER indicator lights green and the projector
						can be turned on. (The WARNING TEMP.
						indicator keeps blinking.) Check and replace the
						filter.
						The projector has been cooled down enough and
	❖					the temperature returns to normal. When turning
						on the projector, the WARNING TEMP. indicator
						stops blinking. Check and replace the filter.
						The lamp cannot light up. (The projector is
	❖					preparing for stand-by or the projection lamp
						is being cooled down. The projector cannot be
						turned on until cooling is completed.)
						The lamp cannot light up. (The lamp has been
	❖					cooled down enough and the projector is in
						stand-by mode and ready to be turned on with
						the ON/STAND-BY button.)
						The lamp has been used overtime. Replace the
						lamp immediately.

WARNING FILTER

When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.68).

LAMP REPLACE

When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this indicator lights orange, replace the projection lamp with a new one promptly (p.69).

80