Sanyo PLC-ZM5000L owner manual Computer Input Auto PC Adjustment, To store the adjusted parameters

Page 37

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Position H and Position V to conform to your computer.

Direct Operation

Remote Control

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control.

AUTO PC button

Menu Operation

Auto PC adj..

1Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select PC adjust and then press the Point ► or the SELECT button.

2Use the Point ▲▼ buttons to select Auto PC adj.. and then press the SELECT button.

To store the adjusted parameters:

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.36). See “Manual PC Adjustment” on pages 38-39.

Note:

Fine sync, Total dots, Position H and Position V of certain computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp.38-39)

The Auto PC adjustment cannot be operated when

480i, 575i, 480p, 575p, 720p, 1035i, 1080i or

1080p is selected in the PC System Menu (p.36), or when the signal is coming from the HDMI or DVI-D terminal.

Depending on the condition of signals and the type and length of cables, the signals may not be properly viewed.

PC adjust Menu

Use the Point ▲▼ buttons to select Auto PC adj.. and press the SELECT button.

Please wait.... . appears while the

Auto PC adjustment is in process.

37

Image 37
Contents Network Set-up and Operation  Projection lens is optionalFeatures and Design Table of Contents To The Owner Safety PrecautionFor EU Users Please, help us to conserve the environ- ment we liveMounting kit approved by the manufacturers Safety InstructionsIndicator Safety Instructions Air CirculationTop Panel FilterCautious use of equipment with laser technology Positioning PrecautionsSafety Instructions Moving the Projector AC Power Cord for the United States and Canada AC Power Cord RequirementAC Power Cord for the United Kingdom CompliancePart Names and Functions ⑱ Adjustable FeetFront Back ⑩ ⑪ ⑫Part Names and Functions Rear Terminal Side Control Indicators on the top panel Part Names and Functions Side Control and IndicatorsPart Names and Functions Remote Control Part Names and Functions Wired Remote Control Transmitter Remote Control Receivers and Operating Range16.4’ 16.4’ 5 mAdjustable Feet Part Names and Functions Remote Control CodeON/OFF Lens Shift Adjustment InstallationLens shift adjustable range When the lens is shifted to topRemoving the lens Installation Lens InstallationAttaching the lens to the projector Unplug the power cords of both Analog Out Signal Table Before connecting cables Installation Connecting for Audio SignalProjector side AC Outlet side Installation Connecting the AC Power CordFor Continental Europe Turning On the Projector Basic OperationEnter a PIN code When using the Direct OFF function, you can not What is PIN code?Power off? disappears after 4 seconds Basic OperationRemote Control Basic Operation How to Operate the On-Screen MenuSide Control On-Screen MenuBasic Operation Main Menu Focus Adjustment Zoom AdjustmentLens Shift Adjustment Basic Operation Operating with Projector ControlVolume Dialog Box Basic Operation Sound AdjustmentDirect Operation Menu OperationInformation Menu Basic Operation Operating with Remote ControlUser 1 of PIP example Pointer button Timer buttonUser 2 of PIP example MouseStandard Basic Operation Keystone CorrectionCorner correction PointBasic Operation Pointer Function Wireless Mouse OperationMouse Pointer button Arrow FingerRemote Control Side Control/Remote Control OperationRemote Control Operation Direct OperationInput Selection Computer Input Source Selection When Selecting Input 2 5 BNC Input JacksPress the Menu button to display the On-Screen Rgbpc analogWhen Selecting Input 3 AV Terminals When Selecting Input 1 Computer Input TerminalsInput Selection Video Input Source Selection Rgbav HdcpComputer System Selection Computer InputAutomatic Multi-Scan System Selecting Computer System ManuallyTo store the adjusted parameters Computer Input Auto PC AdjustmentPC adjust Menu Computer Input Manual PC Adjustment Computer Input Mode freeStore Image select Menu Computer Input Image Level SelectionImage adjust Menu Computer Input Image AdjustmentScreen Size Adjustment Custom adj Custom adjDigital zoom + Digital zoomKeystone Ceiling Rear Video System Selection Video InputVideo Jack or S-video Jack Pb/Cb, Pr/Cr JacksImage select Menu Video Input Image Level SelectionNatural CinemaSelected Image mode Video Input Image AdjustmentColor TintVideo Input ……………When set to On, the aspect ratio is Video Input Screen Size AdjustmentNatural Wide Keystone Ceiling Setting SettingSetting Menu Language Position Logo select Capture Capture Logo PIN code lockLogo PIN code lock Change the Logo PIN code lock setting Change the Logo PIN code lock settingEnter a Logo PIN code Enter a Logo PIN codePosition Menu Picture in PictureHdmi setup To store the adjusted dataImage SoundLamp life control Lamp replacement iconLamp control Lamp life controlSimple mode buttons To change the code for the remote controlTo change the code for the projector Filter controlStandby mode Power managementFactory default is Network RC sensorStop or Cancel the P-timer via Remote Control TimerDirect on PointerPIN code lock Key lockSecurity Key lock and PIN code lock …UnlockedPIN code change Change the PIN code lock settingEnter a PIN code Shutter ShutterProtection Release keyClosed caption Video delay controlFrom Color to White Low ... Keystone can not be selectedFilter counter Factory defaultFilter counter Test patternReset the Filter counter p.68 and the Scroll counter p.68 Maintenance and CareFilter Instructions Do not use the filter cartridge with other projectorOrder Replacement Filter Cartridge Maintenance and Care Replacing the Filter CartridgeRecommendation Filter cover Latch Tab Filter cartridgeResetting the Scroll Counter Maintenance and Care Resetting the Filter CounterFilter counter Filter counter Reset? appears Scroll counter Reset? appearsLamp replacement icon Maintenance and Care Lamp ReplacementLamp Replace indicator Follow these steps to replace the lampLamp Handling Precautions Maintenance and CareOrder Replacement Lamp POA-LMP136Cleaning the Projector Cabinet Maintenance and Care Cleaning the Projection LensUnplug the AC power cord before cleaning Then check the matters below Is the filter clean? Replace the filter with a new oneProblem Solutions TroubleshootingAppendix Appendix Indicators blink or Wireless mouseShutter does not You cannot operateComputer Input/HDMI Input/Video Input Appendix Menu TreeComputer Input Hdmi Input/Video Input Menu display varies depending on Input signalVideo Input ScreenSetting Language Projector is operating normally Appendix Indicators and Projector ConditionLamp Replace Projector is detecting abnormal conditionFreeze p.30 Projector ConditionAppendix Compatible Computer Specifications Freq..Hz Mechanical Information Appendix Technical SpecificationsAppendix Optional Parts Lens ReplacementPJ Link Notice POA-CA-SCARTDigital DVI-D DVI 24 PIN Appendix Configurations of TerminalsLAN Terminal Appendix PIN Code Number Memo Appendix Dimensions Serial Control Interface Appendix List of Picture in PictureOperation NoteFormat Functional Execution CommandStatus Read Command KH2AL
Related manuals
Manual 2 pages 48.98 Kb

PLC-ZM5000, PLC-ZM5000L specifications

The Sanyo PLC-ZM5000L and PLC-ZM5000 projectors are advanced models designed primarily for professional settings, including corporate presentations, educational environments, and high-end home theater setups. Both models are equipped with cutting-edge technologies that deliver exceptional image quality, brightness, and versatility.

One of the standout features of the Sanyo PLC-ZM5000L and PLC-ZM5000 is their high brightness output. With a luminosity rated at up to 5000 ANSI lumens, these projectors ensure clear and vibrant images even in well-lit rooms. This makes them ideal for large venues or spaces where ambient light poses a challenge. The projectors also utilize a high-resolution LCD panel that enhances color reproduction and sharpness, providing users with stunning visuals.

Another significant characteristic of these projectors is their flexible installation options. They feature a wide zoom range and extensive lens shift capabilities, which allow users to position the projector almost anywhere in the room without compromising image quality. This flexibility makes it easier to integrate the projectors into various environments, from conference rooms to auditoriums.

The PLC-ZM5000L and PLC-ZM5000 also incorporate advanced connectivity options. With multiple inputs available, including HDMI, VGA, and component video, users have the versatility to connect a variety of devices, from laptops and desktop computers to DVD players and Blu-ray systems. Additionally, some models support wireless connectivity, making it convenient to project content from personal devices without the clutter of wires.

These projectors also prioritize ease of use and maintenance. They come equipped with features such as an automatic vertical keystone correction, which helps adjust the image shape when the projector is not perfectly aligned with the screen. This ensures that presentations are professional-looking and free from distortion.

Furthermore, the Sanyo PLC-ZM5000L and PLC-ZM5000 boast a long lifespan for their lamp, reducing the frequency of replacements and minimizing downtime. The projectors are designed with energy-saving technologies that extend lamp life, contributing to lower operational costs.

Overall, the Sanyo PLC-ZM5000L and PLC-ZM5000 projectors stand out in the market for their high brightness, image quality, versatile installation options, comprehensive connectivity, and user-friendly features. These projectors are well-suited for professionals seeking reliable and high-performance solutions for their visual presentation needs.