Installation
Lens Installation
When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications.
Removing the lens |
| |
1 | Shift the lens to the central position by using the | Lens release button |
| Lens shift function (p.27). | |
2 | Turn off the projector and unplug the AC power |
|
| cord. |
|
3 | While pressing the Lens release button on the top |
|
of the cabinet, turn the lens counterclockwise until it stops and pull it out slowly from the projector.
CAUTION
Be careful when handling the lens. Do not drop.
Attaching the lens to the projector
1Remove the lens mount cover.
2 Fit the lens to the projector by aligning the red dot | Red |
dots | |
on the lens with the red dot of the projector. |
|
3 Slowly turn the lens clockwise until it clicks. Make sure that the lens is fully inserted to the projector.
CAUTION
Do not press the lens release button when attaching the lens.
NOTES ON LENS INSTALLATION
●Do not touch or remove any parts except the lens and related parts. It may result in malfunctions, electrical shock, fire hazard or other accidents.
●Before installing or replacing the lens, check that the Model No. of the Projection Lens matches with the projector.
●For details of the lens and installation, contact the sales dealer where you purchased the projector.
18