Sanyo POA-LN02 owner manual 107, Why doesn’t the setting page appear in my web browser?

Page 107

Q&A

Q&A

Installation/Access

QWhy doesn’t the setting page appear in my web browser?

AFollowing causes are possible. Please check them.

1.The monitor does not connect to the network. Check LED indicators status ( p.17).

-Check the connection of LAN cable if the LINK indicator does not illuminate red.

-Check the network configuration of the monitor if ACT indicator does not illuminate green.

2.Wrong network configuration of the monitor

Check the network configuration of the monitor ( p.37).

3.Wrong network configuration of the computer. Check the network configuration of the computer.

4.The network unit is used with the default setting ( p.21).

5.The proxy setting of the web browser is not set correctly ( p.100).

6.The computer does not provide TCP/IP protocol.

QNo setting page in my web browser? Is the problem in the network or in the monitor? I would like to find out the problem whether it is in the net- work or in the monitor

ACheck it by the following steps

1.Disconnect the monitor from the network and connect the monitor and com- puter with the UTP cross cable directly.

2.Change network configuration of the computer and monitor as shown in the example below.

(Monitor setting)		(Computer setting)
IP Address	: 192.168.0.2	IP Address	: 192.168.0.5
Subnet Mask	: 255.255.255.0	Subnet Mask	: 255.255.255.0
Default gateway	: 0.0.0.0	Default gateway	: (blank)
DNS	: 0.0.0.0	DNS	: (blank)

LD-NET ORGANIZER OWNER'S MANUAL

107

Image 107

Contents LD-Net Organizer POA-LN02Address ComplianceFederal Communication Commission Notice Model Numbers POA-LN02 Trade Name Sanyo Responsible partyCompliance and Caution Contents Appendix Network ViewerPage Chapter Features Web Management function p.45 Multi-control function p.59 Operating environment of LD-Net Organizer Network unit Quick Setup GuideBefore use Package containsTrademarks Expression/AbbreviationUse of this manual Preparation Installation Set up is complete Flow of installationInstallation and network configuration p.18-25 Installation of the software p.26-28Name and function of each part Mounting Installation and network configurationInstallation and network configuration Connection of LAN cable Configure the network with computer Network configurationProcedure of Connecting the monitor to the network As follows and restart the computer Configure the network with the computerDefault network configuration is set as follows Completing of installation Configure the network of computer Network PIN code setting Set the supplied Network Viewer & Capture Installing the softwareNetwork Viewer & Capture 3 installation Network Viewer 3 File Converter Installed softwareFollowing 3 software are installed on your computer Network CaptureInstalled software and places File Converter 2 InstallationBasic Setting and Operation Entering User Name must be user and it can not be changed Login the setting page of the monitorSelect a display mode and login Enter the IP addressMain setting page in the Standard Mode display Display of main settingSet button How to use the settingMain setting page in the Light Mode display Example of the SettingRadio button setting Type of the setting palletText box setting Pull-down menu settingDescription Initial settingUse of Battery Initial setting Manual setting Date and time settingAuto setting Sets IP address of the monitor Network configurationSetting Smtp server and administrator address Mail settingAddresses are listed as the figure on the right Is turned off except Power/Fan fail, High Temp, Power saveRegistering and deleting E-mail addresses Option selection for sending alert mailExamples Type and contents of alert mail When the signal is interrupted When panel usage time reaches hoursWhen power save function turns Monitor off Community Snmp settingEnter user name of the monitor etc. optional Enter place of the monitor optionalUp to 10 trap addresses can be registered Check and delete the trap addressTrap Item DescriptionTrap option Trap option settingControlling the Monitor Description Monitor status Power control and status checkPower control and status check Input Selects input mode of the monitorSelects signal source of the input ControlsThis function is to adjust the displayed picture image Picture adjustmentSuppresses the sound. ON, OFF Adjusts the sound volumeSound PC adjustment Input mode Setting up the monitorSwitches the screen mode. Full, Zoom169 There may not be available mode depending onSets the image to freeze mode.ON, OFF Sets remote control inhibition mode. ON, OFFThis function is not effective for the settings Mail settings, etcSets to divide the vertical picture Sets tile mode active. Off, OnAdjusts the vertical picture for smooth image Sets to divide the horizontal pictureSet a day or date Timer settingHow to set the timer Select an event action Check the timer eventsChange the event mode Set an execute timeTime Items Description Monitor informationExample of multi control Controlling and setting the multi-monitorsMulti-control Start/stop the multi control Multi control settingConfirmation of registered monitor Register the monitorIndications Change the mode of the registered monitorMode Operation StatusControlling all together Check & Change page in the light modeSetting all together Viewer auto setting all together Network Capture Real Time Capture p.68 Commands on the task barAbout Network Capture function Launching the Network CaptureAbout Image Quality Parameter set upClick Network Capture 3 icon on the task bar Up to 30 computers can be registered Using the Real Time CaptureRegistering the computers Control by the computer Select input mode to Network previouslyStart capturing of the PC1 from the PC5 Control by the web browserUsing the Network Communication Settings before using the Network Communication Menu tree Description of capture editing windowBar of Sub PC Command Tool SaveCommand Tool Tool bar button namesHow to use the Network Communication Erase drawn object Setting of the drawing tool attributeEdit capture image Drawing figuresDrawing letter Letter attribute settingOn the Communication Network Communication operation and change of statePreparation Quits the communication forcibly Executing the forcing modeReleases the editing authority forcibly Error messages Network Viewer File Converter 1 window How to use the Network Viewer 3 File ConverterCreating the available data Network Viewer Launch and quit the File ConverterMenu Sub Menu Description Update Updates contents of the preview windowCreate the available data Menu TreeNetwork Viewer Folder Setting of output destination and conversion modeConversion mode Output destinationSelect a folder and click Save button Open a document with the individual softwareSpecify the root directory of the FTP server. Normally use Procedure of making programCreating a program file Program Editor Enter the FTP server name or IP addressMoves down the selected folder path Displays the folder selection windowDeletes the folder path from the folder list Moves up the selected folder pathSetting up the display order and time of the images Shows that the image in the folder is unchanged Image frame on the index windowBlue frame Red frameLimitation of the Program file This function is not available in the light modeExample of the created program selection Condition to use the Network Viewer function Using the Network Viewer functionUsed when using the network capture function Setup the setting page 2 of Selection display setting Setup the setting page 1 of Image display settingAuto display function Switches to the List modeSwitches to the thumbnail mode Steps down the startup imageAuto Display setting and control Error type Description Error informationAppendix To another network Examples of connectionPeer-To-Peer connection Entrance hall Gateway Router installed in the networkProxy setting Web browser settingActive Script/JavaScript enable Flash Player enable101 ActiveX controls and plug-ins settingExamples OS/Browsers Windows XP Professional102 Flash Player Add-on settingUsing proxy server Not using proxy serverNetscape Navigator 103104 105 Product specification106 Port specificationPin modular connector RJ-45 Following causes are possible. Please check them Why doesn’t the setting page appear in my web browser?107 108 How can I restrict access from the computerHow many monitors can I control with multi-control function? 109You can register up to 10 addresses 110111 Why am I not receiving E-mail alert messages?112 Can I update the firmware of the network unitMAC address is indicated on the case back as the below What is the MAC address assigned to the network unit?113 What are the rules for IP address assignment?Cannot make a new program file Why doesn’t the computer screen appear on the monitor?114 Images from the file server don’t appear on the monitor?Bitmap format .bmp Jpeg format .jpeg .jpg Microsoft power point format .ppt115 What kind of image formats can I convert?Ifkm