Sanyo POA-LN02 Setting of output destination and conversion mode, Output destination, Folder

Creating the available data [Network Viewer 3]

Setting of output destination and conversion mode

When clicking Change button on the confirma- tion window in the step 3 on the previous page, following option setting window appears.

Output destination

Select either Folder or FTP server as the output destination of the converted files.

Folder

Output folder.....Specify a folder in the local hard disk

or shared computer in the network

FTP server

Host name	Enter host name or IP address of the
Root Folder	FTP server
	Specify the root directory of the FTP
User ID	server. Normally use "/".
	Enter your login account of the FTP
Password	sever.
	Enter your password of the FTP server.
Output folder	Specify a directory of the FTP server.

Conversion mode

Resolution.............Selects output image resolution (VGA to SXGA+)

The image resolution higher than the monitor's panel resolution cannot be dis- played.

Image rotation.....Selects image rotation (0, 90, 180, 270).

Conversion Type
Fit	Converts as either width or height of
	the image sets to be the maximum
Justify	screen width or height.
[both ends]	Converts as width of the image sets
Justify	to be the maximum screen width.
[top and bottom]	Converts as height of the image sets
Cut	to be the maximum screen height.
	Cuts image with the screen size not depending on the image size. This type has fol-
	lowing mode.
	Select this mode when you want to have the images with the original size. Select
	each mode by clicking on the button.

Image Quality....Selects an image conversion quality with "High", "Mid" or "Low".

LD-NET ORGANIZER OWNER'S MANUAL

85