Sanyo POA-LN02 owner manual Login the setting page of the monitor, Enter the IP address

Page 30

Chapter 3 Basic Setting and Operation

Login the setting page of the monitor

1 Enter the IP address

Launch the web browser installed in your computer, enter the IP address into the "Address" on the browser and then press "Enter" key.

Enter the address that you configured in item "Network configuration" ( p.21). The default IP address is [192.168.0.2].

2 Select a display mode and login

This product provides 2 types of control mode, Standard Mode and Light Mode as the below. Select a proper mode to match your PC and network environment by click- ing on the text link. Once you select your desired display mode, the setting page you selected display mode will be displayed automatically from the next login. To change the display mode, click "Top" on lower-right corner of the setting page ( p.31).

STANDARD MODE For computer display, displays graphical menus and settings. This mode is recommended for standard use.

LIGHT MODE Displays with 200 x 300 dots. This mode is optimized for use of the handheld computer, PDA, etc. It is also convenient if the network traf- fic is heavy. (This mode has some limitations on the network viewer and multi-control functions.)

If the setting page has set the password, the authentication window will appear. In this case type "user" onto the User Name text area and the login Network PIN code onto the Password text area and then click OK button.

*The entering User Name must be "user" and it can not be changed.

[Note]

When accessing the monitor for the first time or the Network PIN code "0000" is set, the auto-login will be per- formed and the next main setting page is displayed.

30

Image 30

Contents POA-LN02 LD-Net OrganizerModel Numbers POA-LN02 Trade Name Sanyo Responsible party ComplianceFederal Communication Commission Notice AddressCompliance and Caution Contents Network Viewer AppendixPage Chapter Features Web Management function p.45 Multi-control function p.59 Operating environment of LD-Net Organizer Package contains Quick Setup GuideBefore use Network unitExpression/Abbreviation Use of this manualTrademarks Preparation Installation Installation of the software p.26-28 Flow of installationInstallation and network configuration p.18-25 Set up is completeName and function of each part Installation and network configuration MountingInstallation and network configuration Connection of LAN cable Network configuration Procedure of Connecting the monitor to the networkConfigure the network with computer Configure the network with the computer Default network configuration is set as followsAs follows and restart the computer Completing of installation Configure the network of computer Network PIN code setting Installing the software Network Viewer & Capture 3 installationSet the supplied Network Viewer & Capture Network Capture Installed softwareFollowing 3 software are installed on your computer Network Viewer 3 File ConverterFile Converter 2 Installation Installed software and placesBasic Setting and Operation Enter the IP address Login the setting page of the monitorSelect a display mode and login Entering User Name must be user and it can not be changedDisplay of main setting Main setting page in the Standard Mode displayExample of the Setting How to use the settingMain setting page in the Light Mode display Set buttonPull-down menu setting Type of the setting palletText box setting Radio button settingInitial setting Use of BatteryDescription Initial setting Date and time setting Auto settingManual setting Network configuration Sets IP address of the monitorMail setting Setting Smtp server and administrator addressOption selection for sending alert mail Is turned off except Power/Fan fail, High Temp, Power saveRegistering and deleting E-mail addresses Addresses are listed as the figure on the rightExamples Type and contents of alert mail When panel usage time reaches hours When power save function turns Monitor offWhen the signal is interrupted Enter place of the monitor optional Snmp settingEnter user name of the monitor etc. optional CommunityItem Description Check and delete the trap addressTrap Up to 10 trap addresses can be registeredTrap option setting Trap optionControlling the Monitor Power control and status check Description Monitor statusPower control and status check Controls Selects input mode of the monitorSelects signal source of the input InputPicture adjustment This function is to adjust the displayed picture imageAdjusts the sound volume SoundSuppresses the sound. ON, OFF PC adjustment There may not be available mode depending on Setting up the monitorSwitches the screen mode. Full, Zoom169 Input modeMail settings, etc Sets remote control inhibition mode. ON, OFFThis function is not effective for the settings Sets the image to freeze mode.ON, OFFSets to divide the horizontal picture Sets tile mode active. Off, OnAdjusts the vertical picture for smooth image Sets to divide the vertical pictureTimer setting How to set the timerSet a day or date Set an execute time Check the timer eventsChange the event mode Select an event actionTime Monitor information Items DescriptionControlling and setting the multi-monitors Multi-controlExample of multi control Multi control setting Start/stop the multi controlRegister the monitor Confirmation of registered monitorStatus Change the mode of the registered monitorMode Operation IndicationsCheck & Change page in the light mode Setting all togetherControlling all together Viewer auto setting all together Network Capture Launching the Network Capture Commands on the task barAbout Network Capture function Real Time Capture p.68Parameter set up Click Network Capture 3 icon on the task barAbout Image Quality Using the Real Time Capture Registering the computersUp to 30 computers can be registered Select input mode to Network previously Control by the computerControl by the web browser Start capturing of the PC1 from the PC5Using the Network Communication Settings before using the Network Communication Description of capture editing window Menu treeTool bar button names Command Tool SaveCommand Tool Bar of Sub PCHow to use the Network Communication Drawing figures Setting of the drawing tool attributeEdit capture image Erase drawn objectLetter attribute setting Drawing letterNetwork Communication operation and change of state PreparationOn the Communication Executing the forcing mode Releases the editing authority forciblyQuits the communication forcibly Error messages Network Viewer Launch and quit the File Converter How to use the Network Viewer 3 File ConverterCreating the available data Network Viewer File Converter 1 windowMenu Tree Update Updates contents of the preview windowCreate the available data Menu Sub Menu DescriptionNetwork Viewer Output destination Setting of output destination and conversion modeConversion mode FolderOpen a document with the individual software Select a folder and click Save buttonEnter the FTP server name or IP address Procedure of making programCreating a program file Program Editor Specify the root directory of the FTP server. Normally useMoves up the selected folder path Displays the folder selection windowDeletes the folder path from the folder list Moves down the selected folder pathSetting up the display order and time of the images Red frame Image frame on the index windowBlue frame Shows that the image in the folder is unchangedThis function is not available in the light mode Example of the created program selectionLimitation of the Program file Using the Network Viewer function Used when using the network capture functionCondition to use the Network Viewer function Setup the setting page 1 of Image display setting Setup the setting page 2 of Selection display settingSteps down the startup image Switches to the List modeSwitches to the thumbnail mode Auto display functionAuto Display setting and control Error information Error type DescriptionAppendix Examples of connection Peer-To-Peer connectionTo another network Gateway Router installed in the network Entrance hallFlash Player enable Web browser settingActive Script/JavaScript enable Proxy settingWindows XP Professional ActiveX controls and plug-ins settingExamples OS/Browsers 101Not using proxy server Flash Player Add-on settingUsing proxy server 102103 Netscape Navigator104 Product specification 105Port specification Pin modular connector RJ-45106 Why doesn’t the setting page appear in my web browser? 107Following causes are possible. Please check them How can I restrict access from the computer 108109 How many monitors can I control with multi-control function?110 You can register up to 10 addressesWhy am I not receiving E-mail alert messages? 111Can I update the firmware of the network unit 112What are the rules for IP address assignment? What is the MAC address assigned to the network unit?113 MAC address is indicated on the case back as the belowImages from the file server don’t appear on the monitor? Why doesn’t the computer screen appear on the monitor?114 Cannot make a new program fileWhat kind of image formats can I convert? Microsoft power point format .ppt115 Bitmap format .bmp Jpeg format .jpeg .jpgIfkm