Check & Change page in the light mode
Connection status Blinking: Connected Gray: Disconnected
Following functions in the "Check & Change" page are not available in the light mode.
-Changing the control mode.
-Deleting the registered IP address
-Indicating the each status
-Indicating the each memo
This indicates that the mode is "VisualControl".
This indicates that the mode is "Control".
(Check & Change page in the light mode)
Controlling all together
"Power & Status", "PC adjustment", "Control" and "Setting" can be controlled all together. Set "ON" the multi control setting and adjust controls of each menu. The setting value is applied to the registered monitors sequentially .
This is effective only if the multi control item of the regis- tered monitor sets to either "Control&Image" or "Control".
Setting all together
This is effective only if the multi control item of the registered monitor sets to either "Control&Image" or "Control".
63