JBL CVPD50, CVR700 manual System Reset, Letterbox Button z

SYMPTOM	POSSIBLE CAUSE	SOLUTION
The Feature Not Available	• Requested function not available at	• Certain functions may be disabled by
message appears	this time	the DVD itself during passages of a disc.
Picture is displayed in the	• Incorrect match of aspect ratio	• Change aspect ratio settings (see pages 13
wrong aspect ratio	settings disc or video signal	and 27) using the Frame Button ` 24 or
		Letterbox Button z 16 .
Remote control inoperative	• Weak batteries	• Change both batteries.
	• Sensor is blocked	• Clear path to sensor or use optional
		outboard remote sensor.
Disc will not copy to VCR	• Copy protection	• Many DVDs are encoded to prevent copying
		to VCR.

System Reset

In the rare case in which the unit’s opera- tion or the displays seem abnormal, the cause may involve the erratic operation of the system’s memory or microproces- sor. To correct this problem, first try turn- ing off the master power switch on the underside of the CVPD50 (depressed toward the front of the unit) and unplug- ging the JBL Digital Link cable, and the power cords for both the CVR700 and the CVPD50 and wait at least 3 minutes. After the pause, reconnect the AC power cords and the JBL Digital Link, turn the CVPD50’s master power switch to the On position (depressed toward the rear of the unit) and check the system’s opera- tion. If the system still malfunctions, a system reset may clear the problem.

To clear the CVR700’s entire system memory including tuner presets, output level settings, delay times and speaker configuration data, press the Main Power On/Off Button 0 to place both units in Standby mode, and then press and hold the Mute Button q 11 for 5 seconds. The unit’s software version number will flash in the Information Display Ôas an indication that the unit has been successfully reset.

NOTE: Resetting the processor will erase any configuration settings you have made for speakers, output levels, surround modes and digital input assignments, as well as the tuner presets. The unit will be returned to the factory presets, and all settings for these items must be reen- tered.

If the system is still operating incorrectly, there may have been an electronic dis- charge or severe AC line interference that has corrupted the memory or micro- processor. If these steps do not solve the problem, consult your custom installer or an authorized JBL service center.

110