In Screen mode, or when used with a video source device that is used for ob- taining television broadcasts, such as a cable box, satellite receiver, TiVo, PVR, DVR or VCR, this button allows you to select between the television signal or one of the device’s video inputs. See the device’s owner’s manual for more infor- mation on the use of this function.
WLight Button: Press this button to activate the remote’s backlight for ease of use in darkened rooms. The light will remain active for 7 seconds after this but- ton has been pressed, and will remain lit for an additional 7 seconds after any other button on the remote has been pressed.
XMacro/A/B/C Buttons: Press these buttons to store or recall a “Macro”, a sequence of commands that you may pro- gram into the remote. See page 80 for more information on programming and using macros. These buttons have unique functions when used with game con- soles, cable TV boxes and PVRs. See the owner’s manual for the appropriate device for further information.
YSleep/PIP Move Button: This but- ton has different functions depending on which device is in use when it is pressed.
In the System mode, the Sleep function is activated to automatically place the CVR700 and CVPD50 in Standby mode after a period of time. Each press of the button changes the time until
In the Screen mode, this button places the CVPD50 display in Standby mode, without affecting use of the CVR700. This function may be preferred for
When a composite video output from a
Picture Composite Video Input a,
pressing this button enables you to move the PIP inset display around the CVPD50 screen, using the ⁄/¤/‹/ ›
Navigation Disc q.
ZNight Mode/PIP Channel Down
Button: This button’s function differs depending on the device in use when it is pressed.
When pressed in the System mode, this button activates the Night mode, preserv- ing dialogue
When used with a compatible device whose video output has been connected
to the Picture-in-Picture Composite
Video Input a, it changes the channel of the PIP device to the next lower one. It has no effect on the CVR700 or CVPD50.
aDisc Direct/PVR Live Button: This
button’s function differs depending on which device is in use when it is pressed.
In DVD/Main mode, press it, and then press the numeric key corresponding to the position number of the disc you wish to play to immediately begin playback of that disc.
When a PVR is in use, this button switches to play of the signal currently being received by the PVR. See the PVR’s owner’s manual for more information.
bRemote Menu/PIP Channel Up
Button: This button’s function differs depending on whether it is pressed when a
In System mode, this button accesses the menu system for the remote control, enabling you to program product codes, use the EzSet speaker calibration system, record macros, rename functions, and perform other functions, as described on pages 76 through 91.
When used with a compatible device whose video output has been connected to the
cDVD Setup/PIP On-Off/PIP Swap
Button: This button’s function differs depending on whether it is used with the internal DVD changer, or with a source whose video output has been connected to the
Video Input a.
When used with the DVD changer, this button accesses the DVD setup menu and enables you to configure the DVD changer.
When used in Screen mode with a PIP source connected, press this button once
to turn on the PIP function, and again to turn it off. Pressing and holding this but- ton for several seconds causes the main source to appear in the PIP inset display, and the PIP source to appear in the main display. Pressing and holding the button again returns the PIP source to the inset, and the main source to the main display.
dJBL On Screen Library™/ Favorite
Button: This button performs different functions depending on whether it is used with the internal DVD changer or another source.
In DVD/Main mode, this button accesses the JBL On Screen Library, which displays on screen a thumbnail image and descrip- tion of each disc currently loaded in the CVR700’s internal changer, including disc type and title if available. Use the ⁄/¤/‹/›Navigation Controls G and the Set Button Ito conveniently select and play any loaded disc.
When used with cable television boxes or satellite receivers, pressing this button scrolls through your list of prepro- grammed favorite channels.
ePlay Transport Control Button:
This button is used with the internal DVD changer or an external DVD player, VCR, tape deck, digital recorder, CD player or any other device with a transport mecha- nism to begin playback.
fTuning Up/Forward Search
Button: This button has different func- tions depending on whether the tuner or another source is in use.
Press this button when the tuner is in use to change the station to one with a higher frequency. Each tap of this button will increase the frequency by one increment. When the tuner receives a strong enough signal for adequate reception, MANUAL TUNED will appear in the Lower Display Line E. When the tuner is in the Auto/Stereo mode, press and hold the button to cause the tuner to scan for the next higher station with acceptable signal strength and stop. The Lower Display Line Ewill indicate AUTO TUNED. When an FM Stereo station is tuned, the display will read AUTO ST TUNED. When the tuner is in Manual/ Mono mode, you may press and hold this button to scan upward through the fre- quencies, and the tuner will stop immedi- ately when you release this button, even if no acceptable signal is detected at that frequency. See page 64 for more informa- tion on using the tuner.
29