JBL CVR700, CVPD50 manual Disc Skip/Last Channel Buttons, If available. Use the ⁄/¤/‹/›

is detected at that frequency. See page 64 for more information on using the tuner.

When an optical player source, such as the internal DVD changer, is in use, press this button to search quickly forward through the current track or chapter. Depending on the type of disc used in the internal DVD changer, each additional press will cycle through the available scan speeds as follows (available scan speeds may differ for external optical source devices):

DVD-Audio and DVD-Video discs: 2x, 4x, 16x, 100x

CD and VCD discs: 2x, 4x, 8x

MP3 and WMA discs: 2x, 4x, 8x, 16x

See page 68 for more information on using the internal DVD changer’s trans- port controls.

30Preset/Page Up/Down/Forward/ Reverse Skip Buttons: When used with the tuner, these buttons scroll through the preprogrammed station presets.

When used with optical sources, such as the internal disc changer or an external CD player, press the forward button once to skip to the beginning of the next track. Press the reverse button once to return to the beginning of the current track, and once again quickly to skip to the begin- ning of the previous track. When the Pause Button 23 has been pressed while a DVD is playing, the picture advances frame by frame each time the forward skip button is pressed.

The Page Up and Down functions are used with cable and satellite television to page quickly through on-screen menus.

31Disc Skip/Last Channel Buttons:

In the DVD mode, press this button to begin play of the next available disc in the changer.

When used with most video sources, this button returns to the previously selected broadcast channel.

32Picture/Channel Up/Down and Slow Play Forward/Reverse Button:

When a disc containing JPEG still images is being played using the internal disc changer, press the top of this button to advance to the next image on the disc or the bottom of this button return to the previous image.

When a cable television box, satellite receiver, HDTV tuner or TiVo device is in use, press the top of this button to tune

in to the next higher channel, or the bot- tom to tune in to the next lower channel.

When the internal DVD changer or an external DVD player is in use, press the top of this button once to switch to the DVD slow forward play mode. Each addi- tional press of the top of the button will cycle through the available slow-play speeds of 1/2x, 1/4x and 1/8x. Pressing the bottom of the button switches to the DVD slow reverse play mode. Additional presses of the bottom of the button cycles through the available slow-play speeds of 1/2x, 1/4x and 1/8x. No slow- play speeds are available for CDs or other disc types.

33System Selector: Press this button to select the control codes for the CVR700.

34Screen Selector: Press this button to select the control codes for the CVPD50 screen.

35Tone Mode/Color/List Button:

This button controls the tone settings, enabling adjustment of the bass and tre- ble boost or cut. You may also use it to disable the tone controls, for a “flat” response. The first press of the button displays a TONE IN message in the

Lower Display Line E. To disable the controls, press the ⁄/¤ Navigation

Controls 4 until the display reads TONE OUT. To change the bass or tre- ble settings, press this button again until the desired control appears in the Lower Display Line Eand in the on-screen display, and then press the⁄/¤ Navigation Controls 4 until the desired setting appears.

When the Screen mode is active, press this button to adjust the picture settings of the CVPD50 display. See page 55 for more information on screen adjustments. This button also activates the List func- tion for TiVo players. See your TiVo owner’s manual for more information on the List function.

NOTE: The Sports/Broadcast/ Movies Buttons imn 3 optimize picture settings for a specific viewing medium.

The Broadcast settings are the most neu- tral, balanced and accurate, and are opti- mized for clarity. The Movies settings are softer and less bright. The Sports settings are more vibrant and optimized for fast- moving action.

36OSD/Contrast Button: Press this button when the System mode is active to access the setup menu for the CVR700’s audio functions. When the

Screen mode is active, press this button to adjust the contrast of the CVPD50 dis- play. See page 55 for more information on screen adjustments.

NOTE: The Sports/Broadcast/ Movies Buttons imn 3 optimize picture settings for a specific viewing medium.

The Broadcast settings are the most neu- tral, balanced and accurate, and are opti- mized for clarity. The Movies settings are softer and less bright. The Sports settings are more vibrant and optimized for fast- moving action.

37JBL On Screen Library/Settings/ Distance Button: In DVD mode, this but- ton accesses the JBL On Screen Library, which displays on screen a thumbnail image and description of each disc cur- rently loaded in the CVR700’s internal changer, including disc type and title

if available. Use the ⁄/¤/‹/›

Navigation Controls 4 6 and the Set Button 7 to conveniently select and play any loaded disc.

In the System mode, this button is used to enter the distance from each speaker to the listening position to avoid unnatu- ral sound caused by the speakers being placed at varying distances from the listener, which could result in delay artifacts. When this button is pressed, DIST FRONT 10FT will appear in the Lower Display Line E, with FRONT and 10FT both flashing. Press the Set Button 7 to select the front speaker group, and FRONT will stop flashing. Use the ⁄/¤ Navigation Controls 4 to select the desired distance, and press the Set Button 7 again to enter it. Use the

⁄/¤ Navigation Controls 4 to

scroll through the remaining speaker groups: CENTER, SIDE-S(side surround) or BACK-S(back surround, available only after a 6.1-channel bit- stream has been detected).

38Menu/Info/Audio Input Selector:

In DVD mode, this button accesses the menu on the current disc, enabling you to select the main feature or accompanying featurettes for playback or make other selections, depending on how the disc is programmed.

In System mode, press this button to assign one of the Digital Audio Inputs 9)cdefhijk to a source. See page 60 for more information on using digital inputs.

37