Sanyo PLC-WXE46 owner manual Basic Operation Focus Adjustment, Keystone Correction, Top Control

Page 22

Basic Operation

Focus Adjustment

Adjust the lens focus with the focus lever.

Focus Lever

Keystone Correction

If a projected picture has keystone distortion, correct the image with the Keystone function.

Press the KEYSTONE button on the top control or on the remote control. The keystone dialog box appears. Correct keystone distortion with the Point ▲▼ buttons. Keystone adjustment can be stored (p.41).

Reduce the upper width

Reduce the lower width

with the Point ▲ button.

with the Point ▼ button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•The arrows are white when there is no correction. •The direction of the arrow which are being corrected turns red.

•The arrows disappear at the maximum correction. •If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment is canceled. •The adjustable range can be limited depending on the input signal.

•The projected picture may fluctuate momently depending on the keystone adjustment. •“Keystone” disappears after 4 seconds.

Top Control

KEYSTONE button

POINT▲▼ buttons

Remote Control

KEYSTONE button

POINT▲▼ buttons

22

Image 22
Contents Model PLC-WXE46 Network SupportedFeatures and Design NoteTable of Contents Safety Precaution To the OwnerSafety Instructions Installing the Projector in Proper Position Safety Instructions Air CirculationMoving the Projector Compliance AC Power Cord RequirementFederal Communications Commission Notice Part Names and Functions ④ Exhaust VentsPart Names and Functions Rear Terminal ③ LAN Connection TerminalPart Names and Functions Top Control Part Names and Functions Remote Control Part Names and Functions Remote Control Battery Installation Operating RangeAdjustable Feet InstallationPositioning the Projector Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Audio VideoInstallation Connecting to Component Video Equipment Installation Connecting the AC Power Cord Projector side AC outlet sideTurning On the Projector What is PIN code?Basic Operation Enter a PIN codeBasic Operation Turning Off the Projector Basic Operation How to Operate the On-Screen Menu Top Control Menu button Point buttonsFor computer source Basic Operation Menu BarFor video source Keystone Correction Basic Operation Focus AdjustmentRemote Control Top ControlCOMPUTER/VIDEO button Basic Operation Sound AdjustmentRemote Control Operation Freeze buttonBasic Operation Input Menu Computer InputInput Source Selection Source Select MenuPC System Menu Computer Input Computer System SelectionAuto ModeTo store the adjusted parameters Computer Input Auto PC AdjustmentDirect Operation Remote Control PC Adjust MenuComputer Input Manual PC Adjustment Computer Input Computer Input Image Level Selection Computer Input Image Level Adjustment True Screen Size AdjustmentNormal FullFor zooming in and out the images Digital zoom + CustomDigital zoom Input Source Selection Video, S-video Remote Control Menu OperationVideo Input Source Select Menu VideoPointer to Computer 1 and then press the Select Component Auto Video Input Video System SelectionVideo or S-video Auto AV System Menu Video or S-videoVideo Input Image Level Selection CinemaColor Video Input Image Level AdjustmentTint Noise reduction Video InputProgressive Wide Video Input Screen Size AdjustmentZoom Natural wideSetting SettingLoo select SettinLoo Loo and Loo PIN code lock settins CaptureLogo PIN code lock Enter a Logo PIN codeChange the Logo PIN code Logo PIN code lock Logo PIN code lock Dialog BoxScreen aspect CeilingRear TerminalStandby mode Power managementOn start To change the code for the remote controlOn start Remote control Lamp controlKey lock Security Key lock and PIN code lock settingsPIN code lock Change the PIN code Change the PIN code lock settingChange the PIN code Lamp counter FanFan control Filter counterWarnin lo Factory defaultClosed Caption Factory default Closed CaptionMaintenance and Cleaning Note Then check the matters belowMaintenance and Cleaning Cleaning the Air Filters Resetting the Filter CounterCleaning the Projection Lens Maintenance and Cleaning Attaching the Lens CoverCleaning the Projector Cabinet Maintenance and Cleaning Lamp Replacement Reset the lamp replacement counterLamp Handling Precautions Maintenance and Cleaning Lamp Replacement CounterTroubleshooting AppendixAppendix Indicator blinks or lights Projector Condition seeComputer Input/Video Input Appendix Menu TreeSound Computer InputVideo Input Setting System AutoSettingAppendix Indicators and Projector Condition Projector ConditionAppendix Compatible Computer Specifications DisplayTechnical Specifications Accessories DimensionsOptional Parts Appendix PJ Link Notice Appendix Configurations of Terminals Service Port Connector Terminal Mini DIN 8-PINPIN Code Lock No Appendix PIN Code Number MemoLogo PIN Code Lock No KM5AY