Sanyo PLC-WXE46 owner manual Computer Input Computer System Selection, Auto, PC System Menu, Mode

Computer Input

Computer System Selection

The projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If computer is selected as a signal source, the projector automatically detects the signal format and tunes to project proper images without any additional setting. (Signal formats provided in this projector is shown on page 62.)

One of the following messages may appear when:

Auto	The projector cannot recognize the connected
	signal conforming to the provided PC Systems.
	“Auto” is displayed on the PC System Menu
	icon and the Auto PC Adjustment function works
	to display proper images. If images are not
	projected properly, adjust manually. (pp.28–29)

-----There is no signal input from computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 56.)

PC System Menu

The Auto PC Adjustment function operates to adjust the projector.

Mode 1	The preset system is manually adjusted in the
	PC Adjust Menu. The adjusted data can be
	stored in Mode 1–5 (pp.28–29).

SVGA 1	A PC System provided in the projector is
	selected. The projector selects a proper system
	provided in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ◄► buttons to move the red
	frame pointer to the PC System Menu icon.
2	Use the Point ▲▼ buttons to move the red arrow
	pointer to the desired system, and then press the

SELECT button.

PC System Menu

The PC System Menu icon The selected system is displayed.

Available system selection.

Custom Mode (1–5) set in the

PC Adjust Menu (pp.28-29).

26