Setting
Setting
This projector has Setting menu that allows you to set up the other various functions described as follows:
1 | Press the MENU button to display the |
| Menu. Use the Point ◄► buttons to move the red |
| frame pointer to the Setting Menu icon. |
2 | Use the Point ▲▼ buttons to move the red frame |
| pointer to the item that you want to set and then press |
the SELECT button. The Setting dialog box appears.
Language
Setting Menu (Language)
Set the red framed pointer to the item and press the SELECT button.
Setting Menu icon
The language used in the
Keystone
This function corrects distortion of a projected image. Select either Store or Reset with the Point ◄► buttons, and then press the SELECT button. The keystone dialog box appears. Correct keystone with the Point ▲▼ buttons (p.22).
Store……Store the keystone correction even when the
AC power cord is unplugged. Reset……Reset the keystone correction when the AC
power cord is unplugged.
Blue back
Press the Point ◄► buttons to switch on/off. When this function is “On,” a blue image is displayed while the input signal is not detected.
Display
Press the Point ◄► buttons to switch on/off. This function decides to display the
On …………………Display all the
Use this function when you want to project images after the lamp becomes bright enough. This mode is set as a default.
Countdown off… Display the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
Off…………………Do not show the
except:
●
●“Power off?”
●
●“No signal” for Power management item (p.45)
●”Please wait...”
●Arrows for panning mode
Press the SELECT button at Language item, the
SELECT Language Menu appears. button
Press the SELECT button at this item to display the other languages.
Press the SELECT button at this item to close the dialog box.
41