Sanyo PLC-WXE46 owner manual Computer Input Image Level Selection

Computer Input

Image Level Selection

Direct Operation

Select an image level from among Dynamic, Standard, Real, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3, and Image 4 with the IMAGE button on the remote control.

Dynamic

For viewing pictures in a bright room.

Standard

Normal picture level preset on the projector.

Real

Picture level with improved halftone for graphics.

Blackboard (Green)

For viewing the image projected on a blackboard. This mode assists to enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.

Colorboard

At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.

Image 1–4

User preset image in the Image Adjust Menu (pp.31-32).

Remote Control

IMAGE

button

IMAGE button

Dynamic

Standard

Real

Blackboard(Green)

Colorboard

Image 1

Image 2

Image 3

Image 4

Menu Operation
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ◄► buttons to move the red
2	frame pointer to the Image Select Menu icon.
	Use the Point ▲▼ buttons to move the red frame
	pointer to the desired level and then press the SELECT

button.

Dynamic

For viewing pictures in a bright room.

Standard

Normal picture level preset on this projector.

Real

Picture level with improved halftone for graphics.

Blackboard(Green)

For viewing the image projected on a blackboard. See above for further description.

Colorboard

At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Press the SELECT button to choose the color.

Image 1–4

User preset image in the Image Adjust Menu (pp.31-32).

Image Select Menu icon

Image Select Menu

Move the red frame pointer to the desired level and press the SELECT button.

The image level being selected.

30