Power ON/OFF
Turning On The Power
WARNING • When the power is ON, a strong light is emitted. Do not look into the lens or vents of the projector.
NOTE • Turn the power on/off in right order. Please power on the projector before the connected devices. Power off the projector after the connected devices.
1 Make sure that the power cord is firmly and correctly connected to the projector and outlet.
POWER indicator
TEMP
POWERLAMP
STANDBY/ON INPUT | MENU |
2 | When the lens cap is attached, remove |
| the lens cap. |
STANDBY/ON button
3 Set the power switch to [ ] (ON).
Power switch (ON position)
The POWER indicator will light orange.
4 Press the STANDBY/ON button of the projector or the 
button of the remote control.
The projector lamp will light up and the POWER indicator will begin blinking green.
According to a setup, the projector lamp may light up and the POWER indicator may begin blinking green, without pressing this button.
When the power is completely on, the indicator will stop blinking and light green.
Power switch
(STANDBY/ON) button
VIDEO | RGB SEARCH |
ASPECT | AUTO BLANK |
MAGNIFY | VOLUME |
| ON |
14