Hitachi CP-S210T, CP-S210F user manual Remote Control

Page 6

Part Names (continued)

The Remote Control

RGB button 15

selects the input signal of RGB port.

VIDEO button 15

toggles between the signal ports of VIDEO, S-VIDEO and COMPONENT VIDEO.

ASPECT button 21

toggles between the modes for aspect ratio.

21SEARCH button searches for an input signal between the following signal ports of

RGB, VIDEO, S-VIDEO and COMPONENT VIDEO.

14 (STANDBY/ON) button

prepares for turning the power on/off.

19AUTO button executes automatic adjustment.

21BLANK button blanks the screen temporarily.

VIDEO RGB SEARCH

MAGNIFY ON/OFF 20 buttons

turns on/off the MAGNIFY mode.

In the MAGNIFY mode,

To move the magnified area,

(1)Press the POSITION button.

(2)Use the cursor buttons to move the picture.

(3)Press the POSITION button again to finish.

ASPECT

AUTO BLANK

MAGNIFY

VOLUME

ON

 

 

MUTE

OFF

 

FREEZE

KEYSTONE

POSITION

MENU

17VOLUME button turns on/off the VOLUME mode.

In the VOLUME mode,

To adjust the volume,

use the cursor / buttons.

17MUTE button mutes/restores the sound.

19KEYSTONE button

turns on/off the KEYSTONE

To shift the magnify

 

ENTER

level,

 

 

 

use the cursor

/

ESC

RESET

buttons.

 

 

 

FREEZE button 20

freezes/reactivates the picture.

POSITION button 18

turns on/off the POSITION

mode. (for RGB input)

22 ENTER button

In the POSITION mode,

proceeds to the next

To move the picture,

operation at the menu

use the cursor buttons.

functions.

 

ESC button 22

22

, , ,

returns to the previous

 

 

mode.

In the KEYSTONE mode,

To adjust the keystone,

use the cursor / buttons.

22MENU button opens/closes the menu.

22RESET button cancels the adjustment in progress.

*The adjustments of the volume etc. are not reset.

display at the menu

(Cursor) buttons

functions.

works for adjusting or menu controlling.

6

Image 6
Contents Projector CP-S210W/CP-S210WT/CP-S210WFContents Projector Features PreparationPart Names Fastening The Lens CapInput button Power indicator Temp indicator ProjectorRemote Control Setting Up ArrangementAs necessary, you can also finely Adjusting The Projectors ElevatorAdjust the height of the projector by Twisting the elevator feet by handConnecting Your Devices AUDIO-L AUDIO-R ScartConnecting Power Supply Firmly plug the power cord’s plug 1 into the outletClose Battery cover Remote ControlRemove Battery cover Putting BatteriesOperating The Remote Control When the lens cap is attached, remove Power ON/OFFTurning On The Power Set the power switch to onSelecting An Input Signal Turning Off The Power Switch the power switch to O OFFAttached the lens cap Adjusting The Volume OperatingTemporarily Muting The Sound Adjusting The Position Use Buttons to adjust PositionPress the Position button Using The Automatic Adjustment Feature Correcting Keystone DistortionsFreezing The Screen Using The Magnify FeatureUse Buttons to adjust the zoom Level Press the Magnify on buttonSignal Searching Selecting The Aspect RatioTemporarily Blanking The Screen Multifunctional Settings Using The Menu FunctionsMain Menu Picture 1 Menu Picture 1 Menu Load/Save a SettingReset the PICTURE-1 Menu Items MY MemoryPosition PhasePicture 2 Menu SizeFrame Lock Input MenuVideo 3D-YCSInformation Input MenuVideo NR S2-ASPECTAdjust Auto MenuSearch Screen Menu Start UPMessage Option Menu Screen TypeLamp Time Lamp Replacing The Lamp Air Filter Caring For The Air FilterHold the release buttons of the air Replacing The Air FilterNew air filter. Tell the dealer your air Filter, while pulling down itCaring For The Inside Of The Projector Caring For The Cabinet And Remote ControlOther Care Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Power Lamp TempRegarding The Indicator Lamps IndicatorPhenomena That May Easily Be Mistaken For Machine Defects Warranty And After-Service Phenomena That May Easily Be Mistaken For Machine DefectsRGB Input Ports Audio Ports SpecificationsSpecification Video Input PortsTechnical Signal Connectors TechnicalVesa Text Example Of Computer SignalResolution FH kHz FV Hz Rating Signal mode Display VesaInitial Set Signals Mac 13modeConnecting The Cable Communications SettingRS-232C Communication Using the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCommand Data Chart 4A D2日本語 Be EF FE D7 Be EF EC D9 Auto RGB Middle Be EF High Turn on Be EF