Hitachi CP-S210T, CP-S210F user manual Warranty And After-Service

Page 42

Troubleshooting (continued)

Phenomena That May Easily Be Mistaken For Machine Defects (continued)

	Phenomenon	Cases not involving a machine defect,	Reference
	Phenomenon	and Items to be confirmed	pages
		and Items to be confirmed	pages

		The brightness setting and/or contrast setting has not been
		properly adjusted.
		Perform picture adjustments by changing the BRIGHT and/or	23
	Pictures appear	CONTRAST settings, etc.	23
	Pictures appear	CONTRAST settings, etc.
	dark.	The WHISPER mode is the current setting.
		Change (by releasing) from the WHISPER mode.

		Lamp is approaching the end of its product lifetime.	32,33
		Exchange the old lamp with a new lamp.	32,33
		Exchange the old lamp with a new lamp.

		Either the FOCUS setting or the H PHASE is not properly
	Pictures appear	adjusted.	15,26
	Pictures appear	Adjust the focus and the H PHASE setting.
	blurry.	Adjust the focus and the H PHASE setting.

		The lens is dirty or misty.	36
		The lens is dirty or misty.
		Clean the lens.
		Clean the lens.

Warranty And After-Service

If a problem occurs with the equipment, first refer to the “Troubleshooting” section of this manual, and run through the suggested checks. If this does not resolve the problem contact your dealer or service company. They will tell you what warranty condition is applied.

42

Image 42

Contents Projector CP-S210W/CP-S210WT/CP-S210WFContents Projector Features PreparationPart Names Fastening The Lens CapInput button Power indicator Temp indicator ProjectorRemote Control Setting Up ArrangementAs necessary, you can also finely Adjusting The Projectors ElevatorAdjust the height of the projector by Twisting the elevator feet by handConnecting Your Devices AUDIO-L AUDIO-R ScartConnecting Power Supply Firmly plug the power cord’s plug 1 into the outletClose Battery cover Remote ControlRemove Battery cover Putting BatteriesOperating The Remote Control When the lens cap is attached, remove Power ON/OFFTurning On The Power Set the power switch to onSelecting An Input Signal Turning Off The Power Switch the power switch to O OFFAttached the lens cap Adjusting The Volume OperatingTemporarily Muting The Sound Adjusting The Position Use Buttons to adjust PositionPress the Position button Using The Automatic Adjustment Feature Correcting Keystone DistortionsFreezing The Screen Using The Magnify FeatureUse Buttons to adjust the zoom Level Press the Magnify on buttonSignal Searching Selecting The Aspect RatioTemporarily Blanking The Screen Multifunctional Settings Using The Menu FunctionsMain Menu Picture 1 Menu Picture 1 Menu Load/Save a SettingReset the PICTURE-1 Menu Items MY MemoryPosition PhasePicture 2 Menu SizeFrame Lock Input MenuVideo 3D-YCSInformation Input MenuVideo NR S2-ASPECTAdjust Auto MenuSearch Screen Menu Start UPMessage Option Menu Screen TypeLamp Time Lamp Replacing The Lamp Air Filter Caring For The Air FilterHold the release buttons of the air Replacing The Air FilterNew air filter. Tell the dealer your air Filter, while pulling down itCaring For The Inside Of The Projector Caring For The Cabinet And Remote ControlOther Care Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Power Lamp TempRegarding The Indicator Lamps IndicatorPhenomena That May Easily Be Mistaken For Machine Defects Warranty And After-Service Phenomena That May Easily Be Mistaken For Machine DefectsRGB Input Ports Audio Ports SpecificationsSpecification Video Input PortsTechnical Signal Connectors TechnicalVesa Text Example Of Computer SignalResolution FH kHz FV Hz Rating Signal mode Display VesaInitial Set Signals Mac 13modeConnecting The Cable Communications SettingRS-232C Communication Using the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCommand Data Chart 4A D2日本語 Be EF FE D7 Be EF EC D9 Auto RGB Middle Be EF High Turn on Be EF