Hitachi CP-X306, CP-X206 user manual Power on/off, Turning on the power, Turning off the power

Page 15

Power on/off

Turning on the power

1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet.

2. Remove the lens cover, and set the power switch to ON position (marked “ I ”).

The POWER indicator will light up in steady orange (67). Then wait several seconds because the buttons may not function for these several seconds.

3. Press STANDBY/ON button on the projector or the remote control.

The projection lamp will light up and POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in steady green (67).

To display the picture, select an input signal according to the section “Selecting an input signal”(16).

Power on/off

STANDBY/ON button POWER indicator

Power switch

Turning off the power

1. Press the STANDBY/ON button on the projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds.

2. Press the STANDBY/ON button again while the message appears.

The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete (67).

3. Make sure that POWER indicator lights in steady orange, and set the

power switch to OFF position (marked “O“). POWER indicator will go off. Attach the lens cover. Do not turn the projector on for about 10 minutes or more after turning it off.

Turning the projector on again too soon could shorten the lifetime of some Power switch consumable parts of the projector.

WARNING ►A strong light is emitted when the projector’s power is on. Do not look into the lens of the projector or look inside of the projector through any of the projector’s openings.

►Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot.

NOTE • Turn the power on/off in right order. Please power on the projector prior to the connected devices.

When the AUTO ON of the OPTION menu is set to the TURN ON, and the power was turned off by the power switch last time, turning the power switch on makes the projection lamp light on without pushing the STANDBY/ON button (41).

Use the shutdown switch (68) only when the projector is not turned off by normal procedure.

15

Image 15
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Fastening the lens cover Contents of packagePart names ProjectorHOT Control panel Rear panel &10Component Remote control On a horizontal surface Suspended from the ceiling Setting upArrangement CP-X206CP-X306 ArrangementArrangement Speakers Connecting your devicesTo connect them MonitorAbout Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyRemote control Installing the batteriesAbout the remote control signal Using as a simple PC mouse & keyboard Changing the frequency of remote control signalSTANDBY/ON button Power indicator Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal Operating For no signal Searching an input signalSelecting an input signal  For a computer signalAdjusting the zoom and focus Adjusting the projectors elevator For a component video signal Using the automatic adjustment featureAdjusting the position  For a video signal and s-video signalMagnify Using the magnify featureCorrecting the keystone distortions Keystone buttonBlank button Freezing the screenTemporarily blanking the screen Freeze buttonInput button Enter button Using the menu functionReset button Easy MenuAdvanced Menu Using the menu functionKeystone Picture ModeAspect AutoEasy Menu Gamma Picture menuDescription Picture menuLOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MemorySAVE-1, SAVE-2, SAVE-3, SAVE-4 Over Scan For a computer signalFor no signal Image menuSize PhaseAuto Adjust Image menuColor Space Input menuProgressive Video NRComputer Input menuVideo Format Frame LockStandard ResolutionSetup menu Setup menu Standby ModeMonitor OUT Audio VolumeAudio menu SpeakerBlank Screen menuScreen menu Start UPMyScreen Message Capturing error has occurred. Please try againMyScreen registration is finished MyScreen LockTemplate Source NameOption menu Auto SearchAuto on Option menu Auto OFFLamp Time Service MY ButtonMY Source Service Ghost FAN SpeedFilter Message Remote Freq Service InformationFactory Reset KEY LockSecurity Using Security FeaturesInputting the Password Changing the PasswordSetting the Password Using the MyScreen Password FunctionIf you have forgotten your Password Turning on the MyScreen Password FunctionRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off Description SecurityIf you have forgotten your PIN Code Turning Off the PIN Lock FunctionUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Using the MY Text Password function Writing the MY TextDisplaying the MY Text Description Turning on the MY Text Password Network Menu SetupNetwork Menu Projector NameEnter or Input button To switch the image displayed MY ImageTo return to the menu Information Channel Closed Caption menuDisplay ModeMaintenance Replacing the lampType number DT00911 Replacing the lamp Replacing the lamp Lamp warningType number MU05611 Cleaning and replacing the air filterCleaning and replacing the air filter Hitachi MAXELL, part number CR2032 Replacing the internal clock batteryCaring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorRelated messages TroubleshootingRegarding the indicator lamps Shutting the projector down Resetting all settingsInput changeover settings are mismatched Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workLens cover is attached Volume is adjusted to an extremely low levelAUDIO/SPEAKER setting is not correct Mute function is workingWhisper function is working Color settings are not correctly adjustedColor Space setting is not suitable Not properly adjustedSpecifications SpecificationSpecification Specifications
Related manuals
Manual 73 pages 21.39 Kb

CP-X206, CP-X306 specifications

The Hitachi CP-X306 and CP-X206 projectors are designed to meet the needs of both educational and corporate environments, offering high-quality imaging, user-friendly features, and advanced technologies. These models stand out for their efficient performance and robust functionality, making them reliable tools for presentations and lectures.

The CP-X306 comes equipped with a brightness of up to 3,200 ANSI lumens, ensuring clear and vibrant images even in well-lit rooms. Its advanced LCD technology provides rich and accurate color reproduction, catering to various content types—from text to intricate graphics. The projector boasts a resolution of XGA (1024 x 768), making it suitable for most standard presentations without losing detail.

In contrast, the CP-X206, while slightly less bright with a maximum output of 2,500 ANSI lumens, still delivers impressive image quality. It shares the same XGA resolution, making it a cost-effective choice for users who require reliable performance without the highest brightness levels. Both models feature a contrast ratio of 500:1, which enhances the clarity of images, ensuring deep blacks and vibrant colors.

One of the key features present in both projectors is their lightweight and compact design, facilitating easy transport between various settings. This portability is vital for educators and business professionals who frequently move from room to room or travel for presentations. The projectors are equipped with a built-in speaker, allowing for audio playback without the need for external speakers, simplifying setup.

Another notable characteristic is the easy connectivity options offered by both models. They come equipped with multiple input ports, including HDMI, which supports the latest digital devices. Additionally, they have USB ports for direct PC-less presentations, along with standard VGA inputs that accommodate older devices.

User-friendly functionalities such as an automatic vertical keystone correction help ensure that images are perfectly aligned, even in less-than-ideal installation conditions. The projectors also come with an eco-friendly mode that reduces power consumption and extends lamp life, making them an economical choice for long-term use.

In summary, both the Hitachi CP-X306 and CP-X206 projectors deliver reliable performance, high-quality imaging, and user-friendly features that cater to the demands of educational and professional environments. Their portability, connectivity options, and eco-conscious designs make them excellent choices for anyone looking to enhance their presentation experience.