Hitachi CP-X206 Using the Transition Detector Function, Setting the Transition Detector Password

Page 50

OPTION menu

OPTION menu (continued)

Item

Description

SECURITY

(continued)

4. Using the Transition Detector Function

While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.

Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.

Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.

Keystone adjustment feature has been prohibited as long as the Transition Detector function is ON.

4.1 Turning On the Transition Detector Function

4.1-1 Use the ▲/▼ buttons on the SECURITY menu to select TRANSITION DETECTOR and press the ► or the ENTER button to display the TRANSITION DETECTOR on/off menu. Select TURN ON and the current angle and mirror setting will be recorded.

This feature may not function properly if the projector is not in a stable position when TURN ON is selected.

4.1-2 If this function is set to TURN ON when the vertical angle of the projector or mirror setting at which the projector is turned on is different than the previously recorded, the Transition Detector alarm will be displayed and the projector will not display the input signal.

Set the Transition Detector off in the SECURITY menu to display the input signal.

If the Transition Detector alarm is displayed for about 5 minutes, the lamp will turn off. This function will activate only when the projector is started after turning off the AC power.

4.2 Setting the Transition Detector PASSWORD

4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select TRANSITION DETECTOR and press the ► or the ENTER button to display the TRANSITION DETECTOR on/off menu.

4.2-2 Use the ▲/▼ buttons on the TRANSITION DETECTOR on/off menu to select TURN ON. The ENTER PASSWORD box (small) will be displayed.

4.2-3 Use the ▲/▼/◄/► buttons to enter a PASSWORD. Move the cursor to the right side of the ENTER PASSWORD box (small) and press the ► button to display the PASSWORD AGAIN box, enter the same PASSWORD again.

(continued on next page)

50

Image 50
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents Contents of package Fastening the lens coverHOT Part namesProjector Component Control panelRear panel &10 Remote control CP-X206 Setting upArrangement On a horizontal surface Suspended from the ceilingArrangement CP-X306Arrangement Monitor Connecting your devicesTo connect them SpeakersConnecting your devices About Plug-and-Play capabilityConnecting power supply Using the security bar and slotAbout the remote control signal Remote controlInstalling the batteries Changing the frequency of remote control signal Using as a simple PC mouse & keyboardTurning off the power Power on/offTurning on the power STANDBY/ON button Power indicatorOperating Adjusting the volumeSelecting an input signal Temporarily muting the sound For a computer signal Searching an input signalSelecting an input signal  For no signalAdjusting the projectors elevator Adjusting the zoom and focus For a video signal and s-video signal Using the automatic adjustment featureAdjusting the position  For a component video signalKeystone button Using the magnify featureCorrecting the keystone distortions MagnifyFreeze button Freezing the screenTemporarily blanking the screen Blank buttonEasy Menu Using the menu functionReset button Input button Enter buttonUsing the menu function Advanced MenuAuto Picture ModeAspect KeystoneEasy Menu Picture menu GammaPicture menu DescriptionSAVE-1, SAVE-2, SAVE-3, SAVE-4 LOAD-1, LOAD-2, LOAD-3, LOAD-4MY Memory Image menu For a computer signalFor no signal Over ScanImage menu PhaseAuto Adjust SizeVideo NR Input menuProgressive Color SpaceFrame Lock Input menuVideo Format ComputerResolution StandardSetup menu Monitor OUT Setup menuStandby Mode Speaker VolumeAudio menu AudioScreen menu BlankMyScreen Screen menuStart UP MyScreen Lock Capturing error has occurred. Please try againMyScreen registration is finished MessageSource Name TemplateAuto on Option menuAuto Search Lamp Time Option menuAuto OFF MY Source ServiceMY Button Filter Message Service GhostFAN Speed KEY Lock Service InformationFactory Reset Remote FreqChanging the Password Using Security FeaturesInputting the Password SecurityTurning on the MyScreen Password Function Using the MyScreen Password FunctionIf you have forgotten your Password Setting the PasswordDescription Security Using the PIN Lock FunctionTurning the Password off Registering the PIN CodeTurning Off the PIN Lock Function If you have forgotten your PIN CodeTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off Displaying the MY Text Using the MY Text Password functionWriting the MY Text Description Turning on the MY Text Password Setup Network MenuNetwork Menu Enter or Input button ProjectorName To return to the menu To switch the image displayedMY Image Information Mode Closed Caption menuDisplay ChannelType number DT00911 Replacing the lamp MaintenanceReplacing the lamp Lamp warning Replacing the lampCleaning and replacing the air filter Type number MU05611Cleaning and replacing the air filter Replacing the internal clock battery Hitachi MAXELL, part number CR2032Inside of the projector Caring for the cabinet and remote controlOther care Caring for the lensTroubleshooting Related messagesRegarding the indicator lamps Resetting all settings Shutting the projector downSignal source does not correctly work Electrical power cord is not pluggedSignal cables are not correctly connected Input changeover settings are mismatchedMute function is working Volume is adjusted to an extremely low levelAUDIO/SPEAKER setting is not correct Lens cover is attachedNot properly adjusted Color settings are not correctly adjustedColor Space setting is not suitable Whisper function is workingSpecification SpecificationsSpecification Specifications
Related manuals
Manual 73 pages 21.39 Kb

CP-X206, CP-X306 specifications

The Hitachi CP-X306 and CP-X206 projectors are designed to meet the needs of both educational and corporate environments, offering high-quality imaging, user-friendly features, and advanced technologies. These models stand out for their efficient performance and robust functionality, making them reliable tools for presentations and lectures.

The CP-X306 comes equipped with a brightness of up to 3,200 ANSI lumens, ensuring clear and vibrant images even in well-lit rooms. Its advanced LCD technology provides rich and accurate color reproduction, catering to various content types—from text to intricate graphics. The projector boasts a resolution of XGA (1024 x 768), making it suitable for most standard presentations without losing detail.

In contrast, the CP-X206, while slightly less bright with a maximum output of 2,500 ANSI lumens, still delivers impressive image quality. It shares the same XGA resolution, making it a cost-effective choice for users who require reliable performance without the highest brightness levels. Both models feature a contrast ratio of 500:1, which enhances the clarity of images, ensuring deep blacks and vibrant colors.

One of the key features present in both projectors is their lightweight and compact design, facilitating easy transport between various settings. This portability is vital for educators and business professionals who frequently move from room to room or travel for presentations. The projectors are equipped with a built-in speaker, allowing for audio playback without the need for external speakers, simplifying setup.

Another notable characteristic is the easy connectivity options offered by both models. They come equipped with multiple input ports, including HDMI, which supports the latest digital devices. Additionally, they have USB ports for direct PC-less presentations, along with standard VGA inputs that accommodate older devices.

User-friendly functionalities such as an automatic vertical keystone correction help ensure that images are perfectly aligned, even in less-than-ideal installation conditions. The projectors also come with an eco-friendly mode that reduces power consumption and extends lamp life, making them an economical choice for long-term use.

In summary, both the Hitachi CP-X306 and CP-X206 projectors deliver reliable performance, high-quality imaging, and user-friendly features that cater to the demands of educational and professional environments. Their portability, connectivity options, and eco-conscious designs make them excellent choices for anyone looking to enhance their presentation experience.