Hitachi CP-X206, CP-X306 user manual Screen menu, Start UP, MyScreen

SCREEN menu

SCREEN menu (continued)

Item

Description

Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected.

MyScreen ó ORIGINAL ó TURN OFF

			Feature
		MyScreen	Screen can be registered by the MyScreen item
			(below).
START UP
		ORIGINAL	Screen preset as the standard screen.
		TURN OFF	Plain black screen.
	• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
	screen will change to the BLANK screen (37) after several
	minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
	the plain black screen is instead used.
	• When the TURN ON is selected to the MyScreen PASSWORD of
	SECURITY item in OPTION menu (47), the START UP is fixed to
	MyScreen.
	This item allows you to capture an image for use as a MyScreen
	image which can be used as the BLANK screen and START UP
	screen. Display the image you want to capture before executing the
	following procedure.
	1. Selecting this item displays a dialog
		titled “MyScreen”. It will ask you if
		you start capturing an image from
		the current screen.
		Please wait for the target image to be displayed, and press the
		ENTER button when the image is displayed. The image will
		freeze and the frame for capturing will appear.
MyScreen		To stop performing, press the RESET or ESC button.
	2. Using the ▲/▼/◄/► buttons adjusts
		the frame position.
		Please move the frame to the position
		of the image which you want to use.
		The frame may not be able to be
		moved for some input signals.
		To start registration, press the ENTER
		button.
		To restore the screen and return to
		the previous dialog, press the RESET
		or ESC button.
		Registration takes several minutes.
	(continued)

(continued on next page)

38