Hitachi CP-X206 Correcting the keystone distortions, Using the magnify feature, Keystone button

KEYSTONE MY BUTTON MUTE

1 2

Operating

Correcting the keystone distortions	KEYSTONE button
	MAGNIFY FREEZE	PAGE	VOLUME
Press KEYSTONE button on the remote	ON	UP
		DOWN
1. control. A dialog will appear on the screen to	KEYSTONE MY BUTTON		MUTE
aid you in correcting the distortion.	OFF
	1	2

2. Use the ▲/▼ cursor buttons to select AUTO or MANUAL operation, and press the ► button to perform the following.

(1)AUTO executes automatic vertical keystone correction.

(2)MANUAL displays a dialog for keystone correction. Use the ▲/▼ buttons for adjustment.

To close the dialog and complete this operation, press KEYSTONE button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.

●The adjustable range of this correction will vary among inputs. For some input, this function may not work well.

●When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly.

●When the zoom adjustment is set to the TELE (telephoto focus), the automatic keystone distortion correction may be excessive. This function should be used when the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible.

●When the projector is placed on the level (about ±3°), the automatic keystone distortion correction may not work.

●When the projector is inclined to near ±30 degree or over, this function may not work well.

●This function will be unavailable when Transition Detector is on (50).

Using the magnify feature	MAGNIFY
Press the ON button of MAGNIFY on the remote control.	ON/OFF button
1. The “MAGNIFY” indication will appear on the screen and the	MY SOURCE/
	VIDEO COMPUTER DOC.CAMERA
projector will go into the MAGNIFY mode. When the ON button of	ASPECT AUTO SEARCH	BLANK
MAGNIFY is pressed first after the projector is started, the picture	MAGNIFY FREEZE PAGE	VOLUME
	UP

will be zoomed twice. The indication will disappear in several	ON
seconds with no operation.	DOWN
	OFF

2. Use the ▲/▼ cursor buttons to adjust the zoom level. The picture of video, s-video or component video signal can be zoomed in up to 2 times, and the picture of computer signal can be zoomed in up to 4 times.

To move the zoom area, press the POSITION button in the MAGNIFY mode, then use the ▲/▼/◄/► cursor buttons to move the area. And to finalize the zoom area, press the POSITION button again.

To exit from the MAGNIFY mode and restore the screen to normal, press the OFF button of MAGNIFY on the remote control.

●The projector automatically exits from the MAGNIFY mode when the input signal is changed or when the display condition is changed.

●In the MAGNIFY mode, the keystone distortion condition may vary, it will be restored when the projector exits from the MAGNIFY mode.

NOTE • The zoom level can be finely adjusted. Closely watch the screen to find the level you want.

20