Hitachi CP-X306 MyScreen registration is finished, Capturing error has occurred. Please try again

SCREEN menu

SCREEN menu (continued)

Item	Description
	When the registration is completed, the registered screen and the
	following message are displayed for several seconds:
	“MyScreen registration is finished.”
	If the registration failed, the following message is displayed:
MyScreen	“A capturing error has occurred. Please try again.”
(continued)	• This function cannot be selected when the TURN ON is selected
	to the MyScreen Lock item (below).

•This function cannot be selected when TURN ON is selected to the MyScreen PASSWORD of SECURITY item in OPTION menu (47).

	Using the ▲/▼ buttons turns on/off the MyScreen lock function.
	TURN ON ó TURN OFF
MyScreen Lock	When the TURN ON is selected, the MyScreen item is locked. Use
	this function for protecting the current MyScreen.
	• This function cannot be selected when TURN ON is selected to
	the MyScreen PASSWORD of SECURITY item in OPTION menu
	(47).
	Using the ▲/▼ buttons turns on/off the message function.
	TURN ON ó TURN OFF
	When the TURN ON is selected, the following message function works.
	“AUTO IN PROGRESS” while automatically adjusting
	“NO INPUT IS DETECTED”
	“SYNC IS OUT OF RANGE”
	“Searching…” while searching for the input
MESSAGE	“Detecting…” while an input signal is detected
	The indication of the input signal displayed by changing
	The indication of the aspect ratio displayed by changing
	The indication of the PICTURE MODE displayed by changing
	The indication of the MY MEMORY displayed by changing
	The indication of “FREEZE” and “II” while the projector is in the FREEZE mode.
	• If the projector goes into the FREEZE mode while the TURN OFF
	is selected, the picture on screen is frozen without any messages,
	which is not a malfunction (21).

(continued on next page)

39