Hitachi CP-X206, CP-X306 user manual Troubleshooting, Related messages

Page 66

Troubleshooting

Troubleshooting

If an abnormal operation should occur, stop using the projector immediately.

WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact to your dealer or service company.

Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair.

If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Related messages

When some message appears, check and cope with it according to the following table. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.

Message

Description

 

 

 

There is no input signal.

 

Please confirm the signal input connection, and the status

 

of the signal source.

 

The horizontal or vertical frequency of the input signal

 

is not within the specified range.

 

Please confirm the specs for your projector or the signal

 

source specs.

 

An improper signal is input.

 

Please confirm the specs for your projector or the signal

 

source specs.

 

The internal temperature is rising.

 

Please turn the power off, and allow the projector to cool

 

down at least 20 minutes. After having confirmed the

 

following items, please turn the power ON again.

 

• Is there blockage of the air passage aperture?

 

• Is the air filter dirty?

 

• Does the peripheral temperature exceed 35°C?

 

If the same indication is displayed after the remedy, please set

 

FAN SPEED of the SERVICE item in the OPTION menu to HIGH.

 

A note of precaution when cleaning the air filter.

 

Please immediately turn the power off, and clean or change

 

the air filter referring to the “Cleaning and replacing the

 

air filter” section of this manual. After you have cleaned or

 

changed the air filter, please be sure to reset the filter timer

 

(62).

 

 

66

Image 66
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Contents of package Fastening the lens coverPart names ProjectorHOT Control panel Rear panel &10Component Remote control CP-X206 Setting upArrangement On a horizontal surface Suspended from the ceilingArrangement CP-X306Arrangement Monitor Connecting your devicesTo connect them SpeakersConnecting your devices About Plug-and-Play capabilityConnecting power supply Using the security bar and slotRemote control Installing the batteriesAbout the remote control signal Changing the frequency of remote control signal Using as a simple PC mouse & keyboardTurning off the power Power on/offTurning on the power STANDBY/ON button Power indicatorOperating Adjusting the volumeSelecting an input signal Temporarily muting the sound For a computer signal Searching an input signalSelecting an input signal  For no signalAdjusting the projectors elevator Adjusting the zoom and focus For a video signal and s-video signal Using the automatic adjustment featureAdjusting the position  For a component video signalKeystone button Using the magnify featureCorrecting the keystone distortions MagnifyFreeze button Freezing the screenTemporarily blanking the screen Blank buttonEasy Menu Using the menu functionReset button Input button Enter buttonUsing the menu function Advanced MenuAuto Picture ModeAspect KeystoneEasy Menu Picture menu GammaPicture menu DescriptionLOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MemorySAVE-1, SAVE-2, SAVE-3, SAVE-4 Image menu For a computer signalFor no signal Over ScanImage menu PhaseAuto Adjust SizeVideo NR Input menuProgressive Color SpaceFrame Lock Input menuVideo Format ComputerResolution StandardSetup menu Setup menu Standby ModeMonitor OUT Speaker VolumeAudio menu AudioScreen menu BlankScreen menu Start UPMyScreen MyScreen Lock Capturing error has occurred. Please try againMyScreen registration is finished MessageSource Name TemplateOption menu Auto SearchAuto on Option menu Auto OFFLamp Time Service MY ButtonMY Source Service Ghost FAN SpeedFilter Message KEY Lock Service InformationFactory Reset Remote FreqChanging the Password Using Security FeaturesInputting the Password SecurityTurning on the MyScreen Password Function Using the MyScreen Password FunctionIf you have forgotten your Password Setting the PasswordDescription Security Using the PIN Lock FunctionTurning the Password off Registering the PIN CodeTurning Off the PIN Lock Function If you have forgotten your PIN CodeUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Using the MY Text Password function Writing the MY TextDisplaying the MY Text Description Turning on the MY Text Password Setup Network MenuNetwork Menu Projector NameEnter or Input button To switch the image displayed MY ImageTo return to the menu Information Mode Closed Caption menuDisplay ChannelMaintenance Replacing the lampType number DT00911 Replacing the lamp Lamp warning Replacing the lampCleaning and replacing the air filter Type number MU05611Cleaning and replacing the air filter Replacing the internal clock battery Hitachi MAXELL, part number CR2032Inside of the projector Caring for the cabinet and remote controlOther care Caring for the lensTroubleshooting Related messagesRegarding the indicator lamps Resetting all settings Shutting the projector downSignal source does not correctly work Electrical power cord is not pluggedSignal cables are not correctly connected Input changeover settings are mismatchedMute function is working Volume is adjusted to an extremely low levelAUDIO/SPEAKER setting is not correct Lens cover is attachedNot properly adjusted Color settings are not correctly adjustedColor Space setting is not suitable Whisper function is workingSpecifications SpecificationSpecification Specifications
Related manuals
Manual 73 pages 21.39 Kb

CP-X206, CP-X306 specifications

The Hitachi CP-X306 and CP-X206 projectors are designed to meet the needs of both educational and corporate environments, offering high-quality imaging, user-friendly features, and advanced technologies. These models stand out for their efficient performance and robust functionality, making them reliable tools for presentations and lectures.

The CP-X306 comes equipped with a brightness of up to 3,200 ANSI lumens, ensuring clear and vibrant images even in well-lit rooms. Its advanced LCD technology provides rich and accurate color reproduction, catering to various content types—from text to intricate graphics. The projector boasts a resolution of XGA (1024 x 768), making it suitable for most standard presentations without losing detail.

In contrast, the CP-X206, while slightly less bright with a maximum output of 2,500 ANSI lumens, still delivers impressive image quality. It shares the same XGA resolution, making it a cost-effective choice for users who require reliable performance without the highest brightness levels. Both models feature a contrast ratio of 500:1, which enhances the clarity of images, ensuring deep blacks and vibrant colors.

One of the key features present in both projectors is their lightweight and compact design, facilitating easy transport between various settings. This portability is vital for educators and business professionals who frequently move from room to room or travel for presentations. The projectors are equipped with a built-in speaker, allowing for audio playback without the need for external speakers, simplifying setup.

Another notable characteristic is the easy connectivity options offered by both models. They come equipped with multiple input ports, including HDMI, which supports the latest digital devices. Additionally, they have USB ports for direct PC-less presentations, along with standard VGA inputs that accommodate older devices.

User-friendly functionalities such as an automatic vertical keystone correction help ensure that images are perfectly aligned, even in less-than-ideal installation conditions. The projectors also come with an eco-friendly mode that reduces power consumption and extends lamp life, making them an economical choice for long-term use.

In summary, both the Hitachi CP-X306 and CP-X206 projectors deliver reliable performance, high-quality imaging, and user-friendly features that cater to the demands of educational and professional environments. Their portability, connectivity options, and eco-conscious designs make them excellent choices for anyone looking to enhance their presentation experience.