Hitachi CP-X206, CP-X306 user manual Shutting the projector down, Resetting all settings

Page 68

Troubleshooting

Regarding the indicator lamps (continued)

POWER LAMP TEMP indicator indicator indicator

Description

 

 

 

There is a possibility that the interior portion

 

 

 

has become heated.

Blinking

 

 

Please turn the power off, and allow the projector to cool down at least

 

 

20 minutes. After the projector has sufficiently cooled down, please make

In Red

 

 

Turned

Lighting

confirmation of the following items, and then turn the power on again.

or

off

In Red

• Is there blockage of the air passage aperture?

Lighting

 

 

• Is the air filter dirty?

In Red

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

If the same indication is displayed after the remedy, please set FAN

 

 

 

SPEED of SERVICE item in OPTION menu to HIGH (44).

 

 

 

It is time to clean the air filter.

Lighting

Simultaneous

Please immediately turn the power off, and clean or change

the air filter referring to the section “Cleaning and replacing

In Green

blinking in Red

the air filter”. After cleaning or changing the air filter, please

 

 

 

be sure to reset the filter timer.

 

 

 

After the remedy, reset the power to ON.

 

 

 

There is a possibility that the interior portion

Lighting

Alternative

has become overcooled.

Please use the unit within the usage temperature

In Green

blinking in Red

parameters (5°C to 35°C).

 

 

 

 

 

 

After the treatment, reset the power to ON.

Blinking in

 

 

At least 1 Power ON schedule is saved to the

Green for

Turned

Turned

projector.

approx. 3

off

off

Please refer to Schedule Settings section of User’s

seconds

 

 

Manual-Network Guide.

NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

Shutting the projector down

Shutdown switch

Only when the projector can not be turned off by usual procedure (15) , please push the shutdown switch using a pin or similar, and disconnect the power plug from the power outlet. Before turning it on again, wait at least 10 minutes to make the projector cool down enough.

Resetting all settings

When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE item in OPTION menu (45) can reset all settings(except LANGUAGE, FILTER TIME, LAMP TIME, FILTER MESSAGE, NETWORK settings and etc.) to the factory default.

68

Image 68
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents Contents of package Fastening the lens coverHOT Part namesProjector Component Control panelRear panel &10 Remote control Setting up ArrangementCP-X206 On a horizontal surface Suspended from the ceilingArrangement CP-X306Arrangement Connecting your devices To connect themMonitor SpeakersConnecting your devices About Plug-and-Play capabilityConnecting power supply Using the security bar and slotAbout the remote control signal Remote controlInstalling the batteries Changing the frequency of remote control signal Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power STANDBY/ON button Power indicatorAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Selecting an input signal For a computer signal  For no signalAdjusting the projectors elevator Adjusting the zoom and focusUsing the automatic adjustment feature Adjusting the position For a video signal and s-video signal  For a component video signalUsing the magnify feature Correcting the keystone distortionsKeystone button MagnifyFreezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function Reset buttonEasy Menu Input button Enter buttonUsing the menu function Advanced MenuPicture Mode AspectAuto KeystoneEasy Menu Picture menu GammaPicture menu DescriptionSAVE-1, SAVE-2, SAVE-3, SAVE-4 LOAD-1, LOAD-2, LOAD-3, LOAD-4MY Memory For a computer signal For no signalImage menu Over ScanPhase Auto AdjustImage menu SizeInput menu ProgressiveVideo NR Color SpaceInput menu Video FormatFrame Lock ComputerResolution StandardSetup menu Monitor OUT Setup menuStandby Mode Volume Audio menuSpeaker AudioScreen menu BlankMyScreen Screen menuStart UP Capturing error has occurred. Please try again MyScreen registration is finishedMyScreen Lock MessageSource Name TemplateAuto on Option menuAuto Search Lamp Time Option menuAuto OFF MY Source ServiceMY Button Filter Message Service GhostFAN Speed Service Information Factory ResetKEY Lock Remote FreqUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function If you have forgotten your PasswordTurning on the MyScreen Password Function Setting the PasswordUsing the PIN Lock Function Turning the Password offDescription Security Registering the PIN CodeTurning Off the PIN Lock Function If you have forgotten your PIN CodeTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off Displaying the MY Text Using the MY Text Password functionWriting the MY Text Description Turning on the MY Text Password Setup Network MenuNetwork Menu Enter or Input button ProjectorName To return to the menu To switch the image displayedMY Image Information Closed Caption menu DisplayMode ChannelType number DT00911 Replacing the lamp MaintenanceReplacing the lamp Lamp warning Replacing the lampCleaning and replacing the air filter Type number MU05611Cleaning and replacing the air filter Replacing the internal clock battery Hitachi MAXELL, part number CR2032Caring for the cabinet and remote control Other careInside of the projector Caring for the lensTroubleshooting Related messagesRegarding the indicator lamps Resetting all settings Shutting the projector downElectrical power cord is not plugged Signal cables are not correctly connectedSignal source does not correctly work Input changeover settings are mismatchedVolume is adjusted to an extremely low level AUDIO/SPEAKER setting is not correctMute function is working Lens cover is attachedColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Whisper function is workingSpecification SpecificationsSpecification Specifications
Related manuals
Manual 73 pages 21.39 Kb

CP-X206, CP-X306 specifications

The Hitachi CP-X306 and CP-X206 projectors are designed to meet the needs of both educational and corporate environments, offering high-quality imaging, user-friendly features, and advanced technologies. These models stand out for their efficient performance and robust functionality, making them reliable tools for presentations and lectures.

The CP-X306 comes equipped with a brightness of up to 3,200 ANSI lumens, ensuring clear and vibrant images even in well-lit rooms. Its advanced LCD technology provides rich and accurate color reproduction, catering to various content types—from text to intricate graphics. The projector boasts a resolution of XGA (1024 x 768), making it suitable for most standard presentations without losing detail.

In contrast, the CP-X206, while slightly less bright with a maximum output of 2,500 ANSI lumens, still delivers impressive image quality. It shares the same XGA resolution, making it a cost-effective choice for users who require reliable performance without the highest brightness levels. Both models feature a contrast ratio of 500:1, which enhances the clarity of images, ensuring deep blacks and vibrant colors.

One of the key features present in both projectors is their lightweight and compact design, facilitating easy transport between various settings. This portability is vital for educators and business professionals who frequently move from room to room or travel for presentations. The projectors are equipped with a built-in speaker, allowing for audio playback without the need for external speakers, simplifying setup.

Another notable characteristic is the easy connectivity options offered by both models. They come equipped with multiple input ports, including HDMI, which supports the latest digital devices. Additionally, they have USB ports for direct PC-less presentations, along with standard VGA inputs that accommodate older devices.

User-friendly functionalities such as an automatic vertical keystone correction help ensure that images are perfectly aligned, even in less-than-ideal installation conditions. The projectors also come with an eco-friendly mode that reduces power consumption and extends lamp life, making them an economical choice for long-term use.

In summary, both the Hitachi CP-X306 and CP-X206 projectors deliver reliable performance, high-quality imaging, and user-friendly features that cater to the demands of educational and professional environments. Their portability, connectivity options, and eco-conscious designs make them excellent choices for anyone looking to enhance their presentation experience.