OPERATING INSTRUCTIONS (continued)
AUTO button MENU button
| VOL |
RGB 1 RGB 2 | MUTE VOL |
AV1 AV2 AV3 AV4
AUTO PinP SIZE RECALL
MENU
OK
Using the Menu Screen (On-screen display system)
When the MENU button is pressed, the adjustment menu screen will be displayed; from there, PC signal adjustment
RETURN buttons and setting is possible by using the SELECT button,
ADJUST button and OK button.
• Refer to 17 - 21 concerning the adjustment items and the
SELECT/ADJUST settings. buttons
ID | ID SET | OK button |
ID button |
|
|
|
| ID SET button |
Automatic Adjustment of Screen Position and the Clock
Adjustment of the screen to a position suitable for the PC signal and the clock adjustment can be performed automatically by pressing the AUTO button of the remote control.
CAUTION
Perform this adjustment for each input (RGB1 or RGB2) and for each signal.
*Depending on the signal, satisfactory adjustment may not be possible in some cases. In such case, adjust by referring to the Setup Menu item.
Example: Selecting the Picture screen
1. Press the MENU button to display the Main Menu
screen. | Picture |
| |
MENU | Audio |
Timer |
Function
Setup
Language
Select
OK Set
2.Press the OK button to display the Picture Menu screen. (Use the 
and 
SELECT buttons to select other items.)
| Picture |
|
|
|
| Contrast |
| : | + 31 |
OK | Brightness |
| : | – 31 |
Colour |
| : | 0 | |
|
| |||
| Hue |
| : | + 31 |
| Picture Enhancement | : | Off | |
| Colour Temperature | : | Normal | |
| Colour Temp.Adjust |
|
| |
| Reset |
|
| Reset |
| Select | Return |
| Exit |
3.Use the 
and 
SELECT buttons to select the item to be adjusted and then use the 
and 
ADJUST buttons to adjust (example: Contrast).
Independent Operation of Multiple Monitors (ID No)
Setting the ID No. of the remote control allows separate control of up to a maximum of seven monitors. Remote control ID No. 2 (initially ID no. 1) can be set by pressing the ID SET button for 2 sec. or more while holding down the ID button. The number will be incremented (2•••6➔7➔1➔2) when this button pressed continuously.
The remote control ID no. can be checked by pressing the ID SET button while holding down the ID button.
ID Number
Monitor | [ 1 ] |
R/C | [ 1 ] |
Monitor ID no.
Remote control ID no.
The ID remote control is operated by pressing the various buttons while holding down the ID button; Operation is possible only when the remote control and monitor ID nos. are the same.
•The remote control can be operated normally by pressing the various remote control buttons without holding down the ID button.
•Set the monitor using the ID No. of Function MENU. 19
Contrast |
| + 31 |
Next / Prev | Adjust | Return |
•Press the RETURN button to return to the previous screen.
•If there is no operation for a period of one minute, the Adjustment Menu screen will be closed automatically.
16