Hitachi CMP5500 Installation Instructions, Anti-tumble measures, Securing to a wall or pillar

INSTALLATION INSTRUCTIONS

Installation

•If you have purchased the model without the stand attached:

When installing the monitor, use the optional Desk-top Stand (CMPAD16N···55"). The Desk-top Stand has been used for the illustrations in this manual.

WARNING

Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning or dropping and result in fire, electrical shock or injury. Please note that our company assumes absolutely no responsibility for personal injuries or property damage caused by use of other mount units or improper installation.

CAUTION

•Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not attempt this work yourself. Ask your dealer to provide the name of a qualified installer.

•In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches : For a desktop set-up) or more between the sides and other objects such as walls, etc., so that the ventilation holes are not blocked.(✻)

10cm (4 inches) or more*

	cord or chain for 55"
clamp for 55"	cord or chain for 37"
	Wall or Pillar
clamp for 37"

Anti-tumble measures

CAUTION

Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury.

Securing to a wall or pillar

Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar. Hook

	cord or chain for 55"
Cord or Chain
clamp for 55"	cord or chain for 37"
	Wall or Pillar
Hook clamp for 37"
Cord or Chain

Securing desktop

1)Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown.

2)Using commercially available wood screws, secure the set firmly in position.

Wood screw

Two places

10