Hitachi CMP5500, 55PMA550E Operating Instructions Displaying Multi Picture, Pictures Split

Page 36
(Sub- screen)

OPERATING INSTRUCTIONS (continued)

Displaying MULTI PICTURE

RECALL button

VOL

PinP button

RGB 1 RGB 2

MUTE VOL

RECALL button

AV1 AV2 AV3 AV4

AUTO PinP SIZE RECALL

If the PinP button on the remote control is pressed MULTI PICTURE will display.

Activating the P-in-P mode from the RGB input screen

Pressing the PinP button one time will display 2 pictures.

•This mode can be available from RGB1(DVI-PC) and RGB2(RGB) input.

•The speaker icon can be shifted up and down by pressing the and SELECT buttons; the audio of the video will be output from

the side on which the speaker icon

RGB2

is located.

AV1

• The sub-screen position can be

 

selected up and down by pressing

 

SELECT buttons.

 

•The sub-screen can be selected with

the AV1, AV2, AV3, and AV4 buttons from the status that the speaker icon appears on the left side of AV✱ as shown in the diagram to the right.

•Pressing the PinP button again or the RETURN button will cancel the 2 pictures display.

•"Frequency Mode" in the Setup Menu should be set to Movie when

sub-screen is the component signal of 1080i/50 or 1080i/60.

AV1: Displays the VIDEO input signal of the sub-screen.

MENU

OK

RETURN button

ID

ID SET

2 Pictures (Split)

Activating the Split mode from the video input screen

Pressing the PinP button one

AV1

AV2

time will display 2 pictures.

 

 

•The speaker icon can be shifted left and right by pressing the and SELECT buttons; the audio of the video will be output from the side on which the speaker icon is located.

•The same video input mode cannot

be selected for both screens at the same time.

•Pressing the PinP button again or the RETURN button will cancel the 2 pictures display.

•When the Video input is set to RGB Video, this Split mode is not possible.

•Refer to the table for 2 pictures (Split) mode.

Input terminal

 

AV1~AV4

 

 

AV1, AV2

 

RGB1

RGB2

 

 

Sub

PAL

NTSC3.58

576i

480i

1080i/50 1080i/60

720p/60

STB

Component

 

 

Main

SECAM

NTSC4.43

576p

480p

Sub

AV1

PAL, SECAM

 

 

 

 

 

 

 

Main

 

 

 

 

 

 

 

 

 

~AV4

NTSC3.58/4.43

 

 

 

 

 

 

 

 

 

 

576i, 576p

 

 

 

 

 

 

 

 

 

AV1

480i, 480p

 

 

 

 

 

 

 

 

 

1080i/50

 

 

 

 

 

 

 

 

 

AV2

 

 

 

 

 

 

 

 

 

1080i/60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

720p/60

 

 

 

 

 

 

 

 

 

RGB1

STB

 

 

 

 

 

 

 

 

 

RGB2

Component

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(

: Available)

 

NOTE

 

 

 

 

 

 

 

 

 

 

•Even if the input of the horizontal / vertical synchronizing signal (or video signal) stops in the MULTI PICTURE display, the mode will not change to power save mode.

•Please be careful since image retention will occur if display is left in a MULTI PICTURE display state for a long period of time.

Input Signal Screen Display

The input signal status can be displayed on the screen by pressing the RECALL button of the remote control or the monitor.

•The display will go out in approximately 6 seconds.

VIDEO

Off-timer On-timer

OFF -- -- Min.

-- -- : -- --

Input mode

AV1

Composite Signal mode

34

Page 35 Page 37
Image 36
Page 35 Page 37
Contents 37PD5200 55PMA500 Remarque English Features Contents Safety Instructions About the SymbolsBe cautious of the power cord connection Be sure to keep safety ground connectionBe careful in handling the battery of the remote control To Earth Fuse Blue to Neutral Cord ClampSafety Instructions Precautions for the cable connection Precaution during transportationDo not physically impact the remote control Set the sound volume at a suitable levelComponent Names Main UnitRemote control Handling the Remote ControlLoading Batteries Installation Instructions InstallationAnti-tumble measures Securing to a wall or pillarConnecting to a PC Monitor rear panelPage Turning Power On and Off Operating InstructionsOperating Instructions Volume Adjustment Input SwitchingWhen a button is pressed, the volume adjustment Audio MuteSize Switching Input Signal Screen DisplayDisplay area selection diagram RGB input Real mode positionUsing the Menu Screen On-screen display system Automatic Adjustment of Screen Position and the ClockOperating Instructions Independent Operation of Multiple Monitors ID NoPicture Menu Timer Menu Off Timer Min 30Min 60Min 120Min 90Min On TimerAudio Menu Off Low Middle High Off OnFunction Menu Setup Menu Off 1280x768 1366x768Movie Other Features Language MenuAutomatic Store Menu Display Registration conditionOther Features Signal Check Power Save ModeWhen the RGB, RGB2 input is selected Status Display ActionImage Retention of Plasma Display Methods to Reduce the Occurrence of Image RetentionAbout screen defects About residual imagesTroubleshooting Symptoms That Seemingly Appear to be FailuresCheck the way the signal cable is connected Check to see if the input signal matches the monitorEnglish Troubleshooting Actions to Correct Abnormal Displays ExampleProduct Specifications Signal InputRGB terminal D-sub 15-pin connector Pin Input signalProduct Specifications Signal Input Recommended Signal ListWith Digital RGB signal input RGB1 input DVI terminal DVI-DWith Analog RGB signal input RGB2 input Supplement Connecting to a Video Imaging Device An example of connecting video imaging devicesWith DVI-STB and RGB component setup Optional Video Unit FunctionDisplay size selection diagram When you want toInput signal Display screen Remarks AV1 AV2 AV3 RGB2 RGB1 AV4Using a wide-screen monitor PressOperating Instructions Displaying Multi Picture Pictures SplitTime will display 2 pictures YNR Film Mode PAL Comb Filter Operating Instructions Picture MenuBlack Enhancement Auto Colour Colour Management MagentaRed YellowSystem Colour System Video InputAV2 1st step AV2 2nd step Audio Input Scart OutputRGB2 1st step RGB2 2nd stepVideo input Input connector pin specifications Scart connector pin specificationsWith component input Not UsedProduct Specifications Recommended Signal List With R, G, B Video input AV2 and AV4 inputWith component input AV1, AV2 and RGB2-component input KHz MHzRemote control provided for the optional tuner unit Optional Tuner Unit FunctionFreeze button RGB / Video buttons Time buttonYou may recall the picture mode by Picture mode is changed in followingPress this button to change input Surround On or Off Mode Pressing this button. Each time pressedButtons for Teletext Mode Connecting Antenna Precautions when connecting the antennaMonitor rear panel TV AV1 AV2 AV3 RGB2 RGB1 AV4 Auto Full Zoom 149Zoom C149LActivating the Split mode from the TV screen Multi Picture button Multi Mode button ButtonPictures Split 4 pictures 12 pictures Sound mode Off-timerPictures Display will go out in approximately 6 seconds TV positionPicture Freezing Freeze buttonSplit Strobe During TV mode AbcdeOperating Instructions Setup Menu During Video signal inputAuto Off Other Functions A2 / Nicam / Sound MultiplexBilingual / Dual sound broadcast Stereo sound broadcastMode button Index button TV / Text button Cancel button Operating Instructions Other FunctionsDVD Player Selection ExampleSnowy picture poor sound Multiple images sound O.KIntermittent interference No picture or soundRF input Input terminals Model Serial Number DEALER/STORE Date Purchased Hitachi Atago Building
Top Page Image Contents