Hitachi 55PMA550E, CMP5500 Optional Video Unit Function, Connecting to a Video Imaging Device

Optional Video Unit Function

Additional functions when the optional video unit is installed are as follows: ( 31 ~ 42 )

INSTALLATION INSTRUCTIONS

Connecting to a Video Imaging Device

(1)Make sure that the power switch of the monitor is turned off.

(2)Make sure that the power switch of the imaging device is turned off.

(3)Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this device and the signal output terminal of the imaging device.

Speaker (R)	Monitor rear panel	Speaker (L)
(exp)		(exp)
	(37")	(37")
	(55")	(55")

ENGLISH

To audio input terminals	To composite input terminal	20	18	16	14	12	10	8	6	4	2
	21	19	17	15	13	11	9	7	5	3	1

VCR

Power cord

DVD player DVD player

To SCART terminal

To audio output terminals

To composite output terminal To S video output terminal

To component input terminals To component output terminals To audio output terminals To SCART terminals

To RGB,

video and audio input terminals

[An example of connecting video imaging devices]

Set-Top Box

	Use if the
	video
	equipment
VCR	has an
	S video
	input terminal

With DVI-STB and RGB component setup

SUB WOOFER

(55")

To audio sub woofer

To component video equipments.

Please use the connection cable suitable for the terminal form of video equipment.

•If video equipment with an S video output terminal is used, cabling by the S video cable is recommended to provide finer video quality. (If the S video input terminal and the video input terminal of AV3 connect to the monitor at the same time, S video input would govern.)

•If the OUTPUT (MONITOR) terminal is connected to an external monitor with a 75 Ohm terminal, it is possible to view the same image as on the main unit. But it is possible to monitor only the composite video signal from AV1, AV2, AV3, or AV4 input that is displayed on the screen at the time.

Applicable video signals for each input terminal (See PRODUCT SPECIFICATIONS for details.							40 )
Terminal	RCA/SCART		DVI	D-sub	Remarks
Signal	CVBS S-video Component RGB	PC	STB	RGB Component
AV1
AV2					Refer to Setup Menu.	38
AV3
AV4					Refer to Setup Menu.	38
RGB1					Refer to Setup Menu.	39
RGB2					Refer to Setup Menu.	39
						(	: Available)

31