NEC MT1075/MT1065 user manual To connect Scart output RGB, Connecting an External Monitor

Page 15

To connect SCART output (RGB)

Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection.

NOTE:

•Audio signal is not available for this connection.

•The RGB IN 2 connector does not support Plug & Play.

Video equipment

Projector

such as DVD player

 

 

RGB 1 IN

 

To RGB IN 1

Commercially available Female

ADP-SC1

SCART cable

 

1.Turn off the power to the projector and your video equipment.

2.Use the NEC ADP-SC1 SCART adapter and a commercially avail- able SCART cable to connect the RGB 1 input of your projector and a SCART output (RGB) of your video equipment.

3.Turn on the power to the projector and your video equipment.

4.Use the RGB 1 button on the remote control to select the RGB 1 input.

5.Press the MENU button on the remote control to display the menu.

6.From the Advanced menu, select [Projector Options] → [Setup] → [Page 3] → [Signal Select RGB1] → [Scart].

SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euro-connector.

NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Eu- rope. Contact your NEC dealer in Europe for more information.

Connecting an External Monitor

RGB OUT

LINE IN

PHONE

You can connect a separate, external monitor to your projector to simul- taneously view on a monitor the RGB analog image you're projecting. To do so:

1.Turn off the power to your projector, monitor and computer.

2.Use a 15-pin cable to connect your monitor to the RGB OUT (Mini D- Sub 15 pin) connector on your projector.

3.Turn on the projector, monitor and the computer.

NOTE:

•The RGB OUT connector outputs RGB signal during idle mode (See page E- 47). When the projector goes into idle mode, the image on an external moni- tor disappears for a moment. Note that the RGB OUT connector will not out- put RGB signal during Standby mode.

•When the projector is in the Idle mode, the image may not be correctly dis- played while the cooling fans are running immediately after turning on or off the power. Note that the RGB OUT connector will not output RGB signal dur- ing Standby mode.

•Daisy chain connection is not possible.

E-15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents MT1075/MT1065 Safety Cautions For North America only MT1065 only Fire and Shock PrecautionsLamp Replacement Whats in the Box?Table of Contents Features youll enjoy IntroductionIntroduction to the Projector Part Names of the Projector Attaching the lens capCarrying the Projector Select Top FeaturesTerminal Panel Features On the screen using the Select Part Names of the Remote ControlSelect Using the Remote Control in Wired Operation Battery InstallationRemote Control Precautions Operating Range for Wireless Remote ControlInstallation and Connections Setting Up the Screen and the ProjectorSelecting a Location Reflecting the Image Distance ChartDo not attempt to install the projector yourself Throw Distance and Screen SizeConnecting Your PC with a DVI Connector When Viewing a DVI Digital SignalConnecting Your PC or Macintosh Computer Connecting to RGB 2 in connectorsTo connect Scart output RGB Connecting an External MonitorDVD player Connecting Your DVD PlayerConnecting the Supplied Power Cable Connecting Your VCR or Laser Disc PlayerTurning on the Projector Projecting AN Image Basic OperationSelecting a Source Adjusting the Picture Size and PositionUsing the Remote Control Adjust the Tilt FootUse the Focus Button +/- to obtain the best focus When using the remote control or cabinet buttonsUsing Auto Focus FocusConfirmation screen is displayed When using the USB connected to the projectorOptimizing RGB Picture Automatically Turning Up or Down VolumeUsing the Laser Pointer Adjusting the Image Using Auto AdjustSetting the function switch Turning off the ProjectorTo turn off the projector Using the Remote Mouse Function Convenient FeaturesAuto 3D Reform Executing the Auto 3D Reform featureAdjustment Setting Screen of Auto 3D ReformUsing the Pointer Freezing a PictureGetting the On-line Help Using a USB Mouse Using the USB HUB Function Operate the Menus using the USB mouseUsing the middle button on the mouse Changing Background Logo Making Freehand Drawings on a Projected Image ChalkBoardUSB Memory Device or USB Memory Card Reader Support Making the Most out of the Viewer Function Using the ViewerWhen the tool bar is not displayed Operating the Viewer Function from the Projector playbackProjecting slides Viewer Preparations Auto Play ModeSwitching to Slides Directly from Other Input Modes Viewing Digital ImagesUsing the PC Card Files Fucntion PC Card Files Deleting Captured ImagesTo delete captured images Basic Menu Operation Using ON-SCREEN MenuUsing the Menus Default Custom Menu items areAdvanced Menu Menu treeOperation Mode Select Default Source SelectCommunication Speed WEP Menu Elements Entering Alphanumeric Characters by Using the Menu Menu Descriptions & FunctionsSource Select Image Options Entry Edit CommandPicture not available for Viewer and LAN SoundPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup Resolution manually User can adjust the image display functions HoriSelecting Lamp Mode and Lamp Type Lamp Setting Selecting Auto Functions Selecting Aspect Ratio and Position for Screen ScreenNetwork Type required for wireless only Setting LAN ModePared to use of 64bit datalength encryption WEP for Wireless onlyNications may be monitored by someone Uses 64-bit datalength for secure transmissionDelete Setting a PasswordStatus EntryTo enable Security, use the Select SecurityTo delete PC card data you registered Returning to Factory Default ToolsHelp Maintenance Replacing the LampTo replace the lamp Vacuum the filter-through the filter cover CleaningCleaning or Replacing the Filter Cleaning the Cabinet and the LensLamp Indicator TroubleshootingPower Indicator Status IndicatorCommon Problems & Solutions Check These Items Image isn’t square toFor more information contact your dealer Page Model Number MT1075 Optical SpecificationsModel Number MT1065 Optical Pin No RGB Signal Analog YCbCr Signal Cabinet DimensionsPin Assignments of D-Sub RGB Input Connector Mini D-Sub 15 Pin ConnectorCompatible Input Signal List Cable Connection PC Control Connector D-SUB 9PUsing Software Keyboard PC Control Codes and Cable ConnectionHandling of the Address for Operation via a Browser Operation Using an Http BrowserOverview Preparation Before UseTravelCare Guide TravelCare a service for international travelersServices offered with TravelCare Term of warrantyKuala Lumpur, Malaysia Asia and Middle EastApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1075/MT1065 specifications

The NEC MT1075 and MT1065 are high-quality projectors that cater to various presentation needs, making them popular choices in both business and educational settings. Known for their impressive specifications and features, these models deliver outstanding performance, complemented by advanced technologies.

One of the standout features of the NEC MT1075 and MT1065 is their brightness. The MT1075 boasts a luminous output of 3700 ANSI lumens, while the MT1065 offers a slightly lower output of 3600 ANSI lumens. This high brightness level ensures that images remain clear and vivid, even in well-lit environments, making them suitable for large auditoriums, classrooms, and conference rooms.

These projectors employ DLP (Digital Light Processing) technology, which enhances image quality by providing sharp, vibrant colors and high contrast ratios. DLP technology ensures that moving images appear smooth and free from motion blur, making these projectors ideal for displaying videos, animations, and dynamic presentations. The MT1075 and MT1065 also support various resolution formats, with their native SVGA (800 x 600) resolution able to accommodate higher resolutions with clarity.

Another significant characteristic of these projectors is their connectivity options. Both models offer a range of input ports, including VGA, composite video, and S-Video, ensuring compatibility with multiple devices such as laptops, DVD players, and gaming consoles. Additionally, they feature audio input and built-in speakers, providing a complete multimedia experience.

The lightweight design of the NEC MT1075 and MT1065 enhances portability, making them easy to transport and set up in different locations. Their built-in features, such as keystone correction and manual zoom, provide flexibility in positioning the projectors and adjusting the image to fit various screen sizes.

Energy efficiency is another important aspect of the NEC MT1075 and MT1065. Both models utilize advanced lamp technology that ensures long-lasting performance, reducing the frequency of lamp replacements and associated maintenance costs.

Overall, the NEC MT1075 and MT1065 projectors are versatile and reliable, making them suitable for a wide range of applications. Their combination of brightness, advanced DLP technology, connectivity options, and user-friendly features make them an excellent choice for professionals and educators looking to make impactful presentations. With their durability and enhanced image quality, the MT1075 and MT1065 stand out in the competitive projector market.
Top Page Image Contents