NEC MT1075/MT1065 user manual Using a USB Mouse Using the USB HUB Function

Page 28

Using a USB Mouse

Using the USB HUB Function

Using a USB mouse gives you a smooth operation. A commercially avail- able USB mouse is required.

USB(MOUSE/HUB)

When using the projector with a PC via the supplied USB cable, both the USB port(type A) on the projector can be connected to a USB-sup- ported scanner or other USB-supported device. (USB Hub Function)

Example: When connecting a PC and a scanner to each USB port re- spectively

USB(MOUSE/HUB) USB(PC)

NOTE:

•The MT1065 comes with a USB mouse.

•There may be some brands of USB mouse that the projector does not sup- port.

Operate the Menus using the USB mouse

Mouse Cursor

When connecting a USB mouse to the projector, you get a mouse cursor on the screen.

Unless you use your USB mouse within 10 seconds, the mouse cur- sor disappears.

Menu Display

Clicking with a mouse button displays the menu.

Clicking displays the pull-down menu. To close the menu, click anywhere in the background.

Adjusting and Setting Display

You can select a menu item and click with a mouse button to make adjustments and setting.

Examples

Click (or press and hold) the mouse button or to adjust the bright- ness. Or click and drag the mouse button on the slide bar horizontally to adjust it.

To save the adjustments, click . The display is closed. If you click anywhere in the background while displaying adjustment and setting menu or dialog box, you will get the main menu at the clicking point.

Using the middle button on the mouse

The projector supports the middle button on your mouse. With the middle button you can use a scroll bar when it is available or click the middle button to display or hide the Chalkboard toolbar.

An example of how a scanned image is projected

1.Install the Dynamic Image Utility on your PC.

NOTE: The Dynamic Image Utility is contained on the supplied CD-ROM. See the supplied NEC Software Utility Installation Guide for the installation proce- dure.

2.Use your scanner to scan an image.

NOTE: A scanner driver must be installed on your PC before use.

3.Load the scanned image on your PC using the Dynamic Image Util- ity.

4.Transmit the scanned image from your PC to the projector via the USB cable and project the image on the screen.

NOTE:

•The USB HUB function is effective only when “Auto” is selected in Operation Mode Select.

•The PCs using the USB Host Controller may not be available.

•When connecting a USB hub to the USB port (type B) on the projector, be sure to use a USB hub capable of supplying 500mA per port of downstream current.

E-28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents MT1075/MT1065 Safety Cautions Fire and Shock Precautions Lamp ReplacementWhats in the Box? For North America only MT1065 onlyTable of Contents Introduction Features youll enjoyIntroduction to the Projector Attaching the lens cap Part Names of the ProjectorCarrying the Projector Top Features SelectTerminal Panel Features Part Names of the Remote Control On the screen using the SelectSelect Battery Installation Remote Control PrecautionsOperating Range for Wireless Remote Control Using the Remote Control in Wired OperationSetting Up the Screen and the Projector Installation and ConnectionsSelecting a Location Distance Chart Do not attempt to install the projector yourselfThrow Distance and Screen Size Reflecting the ImageWhen Viewing a DVI Digital Signal Connecting Your PC or Macintosh ComputerConnecting to RGB 2 in connectors Connecting Your PC with a DVI ConnectorConnecting an External Monitor To connect Scart output RGBConnecting Your DVD Player DVD playerConnecting Your VCR or Laser Disc Player Connecting the Supplied Power CableProjecting AN Image Basic Operation Turning on the ProjectorAdjusting the Picture Size and Position Using the Remote ControlAdjust the Tilt Foot Selecting a SourceWhen using the remote control or cabinet buttons Using Auto FocusFocus Use the Focus Button +/- to obtain the best focusWhen using the USB connected to the projector Confirmation screen is displayedTurning Up or Down Volume Using the Laser PointerAdjusting the Image Using Auto Adjust Optimizing RGB Picture AutomaticallyTurning off the Projector Setting the function switchTo turn off the projector Convenient Features Using the Remote Mouse FunctionExecuting the Auto 3D Reform feature Auto 3D ReformSetting Screen of Auto 3D Reform AdjustmentFreezing a Picture Using the PointerGetting the On-line Help Operate the Menus using the USB mouse Using a USB Mouse Using the USB HUB FunctionUsing the middle button on the mouse Making Freehand Drawings on a Projected Image ChalkBoard Changing Background LogoUSB Memory Device or USB Memory Card Reader Support Using the Viewer Making the Most out of the Viewer FunctionOperating the Viewer Function from the Projector playback When the tool bar is not displayedProjecting slides Viewer Auto Play Mode Switching to Slides Directly from Other Input ModesViewing Digital Images PreparationsDeleting Captured Images Using the PC Card Files Fucntion PC Card FilesTo delete captured images Using ON-SCREEN Menu Using the MenusDefault Custom Menu items are Basic Menu OperationMenu tree Advanced MenuDefault Source Select Operation Mode SelectCommunication Speed WEP Menu Elements Menu Descriptions & Functions Entering Alphanumeric Characters by Using the MenuSource Select Entry Edit Command Picture not available for Viewer and LANSound Image OptionsPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup User can adjust the image display functions Hori Resolution manuallySelecting Lamp Mode and Lamp Type Lamp Setting Selecting Aspect Ratio and Position for Screen Screen Selecting Auto FunctionsSetting LAN Mode Network Type required for wireless onlyWEP for Wireless only Nications may be monitored by someoneUses 64-bit datalength for secure transmission Pared to use of 64bit datalength encryptionSetting a Password StatusEntry DeleteSecurity To enable Security, use the SelectTo delete PC card data you registered Tools Returning to Factory DefaultHelp Replacing the Lamp MaintenanceTo replace the lamp Cleaning Cleaning or Replacing the FilterCleaning the Cabinet and the Lens Vacuum the filter-through the filter coverTroubleshooting Power IndicatorStatus Indicator Lamp IndicatorImage isn’t square to Common Problems & Solutions Check These ItemsFor more information contact your dealer Page Specifications Model Number MT1075 OpticalModel Number MT1065 Optical Cabinet Dimensions Pin Assignments of D-Sub RGB Input ConnectorMini D-Sub 15 Pin Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List PC Control Connector D-SUB 9P Using Software KeyboardPC Control Codes and Cable Connection Cable ConnectionOperation Using an Http Browser OverviewPreparation Before Use Handling of the Address for Operation via a BrowserTravelCare a service for international travelers Services offered with TravelCareTerm of warranty TravelCare GuideAsia and Middle East Kuala Lumpur, MalaysiaApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1075/MT1065 specifications

The NEC MT1075 and MT1065 are high-quality projectors that cater to various presentation needs, making them popular choices in both business and educational settings. Known for their impressive specifications and features, these models deliver outstanding performance, complemented by advanced technologies.

One of the standout features of the NEC MT1075 and MT1065 is their brightness. The MT1075 boasts a luminous output of 3700 ANSI lumens, while the MT1065 offers a slightly lower output of 3600 ANSI lumens. This high brightness level ensures that images remain clear and vivid, even in well-lit environments, making them suitable for large auditoriums, classrooms, and conference rooms.

These projectors employ DLP (Digital Light Processing) technology, which enhances image quality by providing sharp, vibrant colors and high contrast ratios. DLP technology ensures that moving images appear smooth and free from motion blur, making these projectors ideal for displaying videos, animations, and dynamic presentations. The MT1075 and MT1065 also support various resolution formats, with their native SVGA (800 x 600) resolution able to accommodate higher resolutions with clarity.

Another significant characteristic of these projectors is their connectivity options. Both models offer a range of input ports, including VGA, composite video, and S-Video, ensuring compatibility with multiple devices such as laptops, DVD players, and gaming consoles. Additionally, they feature audio input and built-in speakers, providing a complete multimedia experience.

The lightweight design of the NEC MT1075 and MT1065 enhances portability, making them easy to transport and set up in different locations. Their built-in features, such as keystone correction and manual zoom, provide flexibility in positioning the projectors and adjusting the image to fit various screen sizes.

Energy efficiency is another important aspect of the NEC MT1075 and MT1065. Both models utilize advanced lamp technology that ensures long-lasting performance, reducing the frequency of lamp replacements and associated maintenance costs.

Overall, the NEC MT1075 and MT1065 projectors are versatile and reliable, making them suitable for a wide range of applications. Their combination of brightness, advanced DLP technology, connectivity options, and user-friendly features make them an excellent choice for professionals and educators looking to make impactful presentations. With their durability and enhanced image quality, the MT1075 and MT1065 stand out in the competitive projector market.
Top Page Image Contents