NEC MT1075/MT1065 user manual Whats in the Box?, Fire and Shock Precautions, Lamp Replacement

Page 3

Fire and Shock Precautions

1.Ensure that there is sufficient ventilation and that vents are unob- structed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10 cm) of space between your projector and a wall.

2.Prevent foreign objects such as paper clips and bits of paper from falling into your projector.

Do not attempt to retrieve any objects that might fall into your projec- tor. Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, dis- connect it immediately and have the object removed by a qualified NEC service personnel.

3.Do not place any liquids on top of your projector.

4.Do not look into the lens while the projector is on. Serious damage to your eyes could result.

5.Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the lens is extensive, there- fore any kind of abnormal objects that can redirect light coming out of the lens, can cause unpredictable outcome such as fire or injury to the eyes.

6.Do not cover the lens with the supplied lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap and possibly burning your hands due to the heat emitted from the light output.

7.The projector is designed to operate on a power supply of 100-240 V 50/60 Hz AC. Ensure that your power supply fits this requirement before attempting to use your projector.

8.Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire.

9.If the projector is not to be used for an extended period of time, disconnect the plug from the power outlet.

10.Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.

CAUTION

1.

Do not try to touch the ventilation outlet on the front as it can be-

 

come heated while the projector is turned on.

2.

Do no use the tilt-foot for purposes other than originally intended.

 

Misuses such as gripping the tilt-foot or hanging on the wall can

 

cause damage to the projector.

•Allow a minimum of 90 seconds to elapse after turning off the pro- jector. Then turn off the main power switch, disconnect the power cable and allow 60 minutes to cool the projector before replacing the lamp.

What's in the Box?

Make sure your box contains everything listed. If any pieces are miss- ing, contact your dealer.

Please save the original box and packing materials if you ever need to ship your MT1075/MT1065 Projector.

Lens cap

 

 

 

 

 

 

 

Projector

Remote Control Cable

 

 

 

 

 

 

 

 

(7N520019)

 

 

 

 

 

 

SELECT

 

 

 

 

 

 

 

 

PJ

 

 

 

 

ASPECT

FREEZE

 

 

 

 

 

 

HELP

 

3D

 

 

 

VOLUME

PO

INTER

 

REFORM

 

 

MAGNIFY

PIC-MUTE

 

 

 

 

SLIDE

 

 

 

ZOOM

 

 

 

 

 

 

 

FOCUS

 

 

 

 

 

 

 

 

FO

LDER

 

 

 

 

 

 

 

 

 

 

 

 

 

SLIDE

 

 

 

 

 

 

 

 

LIST

 

 

 

 

 

 

 

 

Remote control

Batteries

String (24C05051) and

(7N900363)

 

rivet (24C04531)

Power cable

USB cable

RGB signal cable

(US: 7N080204)

(7N520013)

(7N520032)

(EU: 7N080008)

 

 

3.

Enable High-Speed Fan mode if you continue to use the projector

 

for consecutive days. (From the Advanced menu, select [Projector

 

Options] → [Setup] → [Page 4] → [High Speed Fan Mode].)

4.

Do not unplug the power cable from the wall outlet under any one of

 

the following circumstances.

 

Doing so can cause damage to the projector:

 

* While the Hour Glass icon appears.

 

* While the message "Please wait a moment." appears. This mes-

 

sage will be displayed after the projector is turned off.

User's Manual

 

 

Quick

Connect

Guide

 

Software NEC

Installation

 

Utility

 

Guide

CD-ROM

Projector User Supportware (7N950432)

 

* While the cooling fans are running. (The cooling fans continue to

 

work for 90 seconds after the projector is turned off).

5.

Do not eject the PC card or LAN card while its data is being accessed.

 

Doing so can damage your PC card or LAN card data.

6.

Do not hold the lens part with your fingers. Doing so could pinch

 

fingers or hands causing injury.

Lamp Replacement

•To replace the lamp, follow all instructions provided on page E-55.

•Be sure to replace the lamp when the message "The lamp has reached the end of its usable life. Please replace the lamp." appears. If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury.

If this happens, contact your NEC dealer for lamp replacement.

For North America only

MT1065 only

Registration card

USB mouse (7N960151)

Limited warranty

 

For Europe only

 

Guarantee policy

 

E-3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents MT1075/MT1065 Safety Cautions For North America only MT1065 only Fire and Shock PrecautionsLamp Replacement Whats in the Box?Table of Contents Features youll enjoy IntroductionIntroduction to the Projector Part Names of the Projector Attaching the lens capCarrying the Projector Select Top FeaturesTerminal Panel Features On the screen using the Select Part Names of the Remote ControlSelect Using the Remote Control in Wired Operation Battery InstallationRemote Control Precautions Operating Range for Wireless Remote ControlInstallation and Connections Setting Up the Screen and the ProjectorSelecting a Location Reflecting the Image Distance ChartDo not attempt to install the projector yourself Throw Distance and Screen SizeConnecting Your PC with a DVI Connector When Viewing a DVI Digital SignalConnecting Your PC or Macintosh Computer Connecting to RGB 2 in connectorsTo connect Scart output RGB Connecting an External MonitorDVD player Connecting Your DVD PlayerConnecting the Supplied Power Cable Connecting Your VCR or Laser Disc PlayerTurning on the Projector Projecting AN Image Basic OperationSelecting a Source Adjusting the Picture Size and PositionUsing the Remote Control Adjust the Tilt FootUse the Focus Button +/- to obtain the best focus When using the remote control or cabinet buttonsUsing Auto Focus FocusConfirmation screen is displayed When using the USB connected to the projectorOptimizing RGB Picture Automatically Turning Up or Down VolumeUsing the Laser Pointer Adjusting the Image Using Auto AdjustSetting the function switch Turning off the ProjectorTo turn off the projector Using the Remote Mouse Function Convenient FeaturesAuto 3D Reform Executing the Auto 3D Reform featureAdjustment Setting Screen of Auto 3D ReformUsing the Pointer Freezing a PictureGetting the On-line Help Using a USB Mouse Using the USB HUB Function Operate the Menus using the USB mouseUsing the middle button on the mouse Changing Background Logo Making Freehand Drawings on a Projected Image ChalkBoardUSB Memory Device or USB Memory Card Reader Support Making the Most out of the Viewer Function Using the ViewerWhen the tool bar is not displayed Operating the Viewer Function from the Projector playbackProjecting slides Viewer Preparations Auto Play ModeSwitching to Slides Directly from Other Input Modes Viewing Digital ImagesUsing the PC Card Files Fucntion PC Card Files Deleting Captured ImagesTo delete captured images Basic Menu Operation Using ON-SCREEN MenuUsing the Menus Default Custom Menu items areAdvanced Menu Menu treeOperation Mode Select Default Source SelectCommunication Speed WEP Menu Elements Entering Alphanumeric Characters by Using the Menu Menu Descriptions & FunctionsSource Select Image Options Entry Edit CommandPicture not available for Viewer and LAN SoundPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup Resolution manually User can adjust the image display functions HoriSelecting Lamp Mode and Lamp Type Lamp Setting Selecting Auto Functions Selecting Aspect Ratio and Position for Screen ScreenNetwork Type required for wireless only Setting LAN ModePared to use of 64bit datalength encryption WEP for Wireless onlyNications may be monitored by someone Uses 64-bit datalength for secure transmissionDelete Setting a PasswordStatus EntryTo enable Security, use the Select SecurityTo delete PC card data you registered Returning to Factory Default ToolsHelp Maintenance Replacing the LampTo replace the lamp Vacuum the filter-through the filter cover CleaningCleaning or Replacing the Filter Cleaning the Cabinet and the LensLamp Indicator TroubleshootingPower Indicator Status IndicatorCommon Problems & Solutions Check These Items Image isn’t square toFor more information contact your dealer Page Model Number MT1075 Optical SpecificationsModel Number MT1065 Optical Pin No RGB Signal Analog YCbCr Signal Cabinet DimensionsPin Assignments of D-Sub RGB Input Connector Mini D-Sub 15 Pin ConnectorCompatible Input Signal List Cable Connection PC Control Connector D-SUB 9PUsing Software Keyboard PC Control Codes and Cable ConnectionHandling of the Address for Operation via a Browser Operation Using an Http BrowserOverview Preparation Before UseTravelCare Guide TravelCare a service for international travelersServices offered with TravelCare Term of warrantyKuala Lumpur, Malaysia Asia and Middle EastApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1075/MT1065 specifications

The NEC MT1075 and MT1065 are high-quality projectors that cater to various presentation needs, making them popular choices in both business and educational settings. Known for their impressive specifications and features, these models deliver outstanding performance, complemented by advanced technologies.

One of the standout features of the NEC MT1075 and MT1065 is their brightness. The MT1075 boasts a luminous output of 3700 ANSI lumens, while the MT1065 offers a slightly lower output of 3600 ANSI lumens. This high brightness level ensures that images remain clear and vivid, even in well-lit environments, making them suitable for large auditoriums, classrooms, and conference rooms.

These projectors employ DLP (Digital Light Processing) technology, which enhances image quality by providing sharp, vibrant colors and high contrast ratios. DLP technology ensures that moving images appear smooth and free from motion blur, making these projectors ideal for displaying videos, animations, and dynamic presentations. The MT1075 and MT1065 also support various resolution formats, with their native SVGA (800 x 600) resolution able to accommodate higher resolutions with clarity.

Another significant characteristic of these projectors is their connectivity options. Both models offer a range of input ports, including VGA, composite video, and S-Video, ensuring compatibility with multiple devices such as laptops, DVD players, and gaming consoles. Additionally, they feature audio input and built-in speakers, providing a complete multimedia experience.

The lightweight design of the NEC MT1075 and MT1065 enhances portability, making them easy to transport and set up in different locations. Their built-in features, such as keystone correction and manual zoom, provide flexibility in positioning the projectors and adjusting the image to fit various screen sizes.

Energy efficiency is another important aspect of the NEC MT1075 and MT1065. Both models utilize advanced lamp technology that ensures long-lasting performance, reducing the frequency of lamp replacements and associated maintenance costs.

Overall, the NEC MT1075 and MT1065 projectors are versatile and reliable, making them suitable for a wide range of applications. Their combination of brightness, advanced DLP technology, connectivity options, and user-friendly features make them an excellent choice for professionals and educators looking to make impactful presentations. With their durability and enhanced image quality, the MT1075 and MT1065 stand out in the competitive projector market.
Top Page Image Contents