NEC MT1075/MT1065 user manual Auto Play Mode, Switching to Slides Directly from Other Input Modes

NOTE: You can also use the and button on the remote control to select folders or slides.

If you use the and button on the remote control for Viewer operation, press the PJ button to switch to the Projector mode and the PJ button lights red.

Preparations:

Insert the PC card into the card slot.

Insert the PC card so that the end with the insertion direction arrow on the top goes in first.

			SELECT
E				L
N				E
T	E			C
		R		N
			A
			C

PJ

Works as the Select button on the projector.

Lit red

*Press the eject button to eject the card.

1.Project the image you wish to store on the projector.

2.Select the "Capture" from the Tools menu.

Auto Play Mode

If the "Auto Play" option is selected in "Viewer Options" of the menu, any given slide will start to play automatically.

You can also specify Auto Play Interval between 5 and 300 seconds.

Switching to Slides Directly from Other Input Modes

With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.

Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the Viewer button.

NOTE: Even if you switch the current Viewer source to another source, the cur- rent slide is retained. When you return back to the Viewer, you will get the slide that has been retained.

The PC card editing operation cannot be performed from the projector. Do so using the Dynamic Image Utility 2.0 software.

Viewing Digital Images

Digital images can be played with the Viewer if the following conditions are met:

•If the image can be stored on an MS-DOS format PC card

•If the image can be stored in a format supported by the Viewer. With the Viewer, images on the card are searched for in directories and images in JPEG or BMP format are recognized as slides. Searchable directories are directories within two steps from the root directory, and searchable images are images within the first 12 files in the di- rectory. Only file and slide switching are possible.

NOTE: The maximum number of images recognized as slides within one direc- tory is 128.

Storing Images Displayed on the Projector on the PC card (Capture)

The Capture features allows you to capture an image from a source that is currently being displayed. The image is saved as JPEG in the PC card. When you select Capture from the menu, you will get a tool bar. You can capture an image directly using the tool bar when the menu is not displayed.

NOTE:

*Unless a PC card is inserted into the PC Card slot of the projector, the Capture feature is not available.

*The "Card Error" display means that the free space of the PC card is insufficient for saving images. Make more space available on the card by erasing un- wanted images with your PC. The number of images that can be captured depends on the size of the PC card.

*Be sure not to turn off the power or remove the PC card while capturing an image. Doing so could cause a loss of the data in the PC card or damage to the card itself.

3. A tool bar will appear.

Capture Freeze

Drag Exit

Drive

The tool bar includes the following buttons:

Drag	Drags to move the tool bar by clicking on the blue part (for
	USB mouse operation only).
Capture	Captures an image and save it as a JPEG file on a PC
	card.
Freeze	Freezes and unfreezes images.
Drive	Switches between PC Card slot 1 and 2.
Exit	Exits the Capture function. Another option to exit the Cap-
	ture function is to press MENU or CANCEL button on the
	remote control or projector cabinet.

NOTE:

You can compress a captured file (JPEG) using the Capture Options in the Setup dialog. See page E-46.

Captured images with higher resolution than the projector's native resolution cannot be displayed correctly.

•File size of the captured image varies depending on the resolution of an input signal.

•An hourglass indicating that an image is being captured appears on the projector's display. Do not eject the PC card or turn off the projector's power while this icon is displayed. Doing so will damage the PC card data. If the PC card data is damaged, use a computer to repair the data.

•Up to 12 indexes can be displayed on the list of folders. The folder in the right bottom is always a folder exclusively for captured images, but is only dis- played when images have been captured.

E-32