NEC MT1075/MT1065 Selecting Aspect Ratio and Position for Screen Screen, Selecting Auto Functions

Page 49

Selecting Aspect Ratio and Position for Screen [Screen]

Screen Type:

Select either 4:3 Screen or 16:9 Screen for the screen to be used. See also "Aspect Ratio" on page E-40.

NOTE: When "Resolution" is set to "Native", this selection is inactive.

Position:

This feature adjusts the vertical position of the image when viewing video with an aspect ratio selected.

When some aspect ratios are selected in Image Options, the image is displayed with black borders on the top and bottom.

You can adjust the vertical position between top and bottom.

NOTE: This option is not available when "4:3" is selected in Screen Type and "Letterbox" is selected in Aspect Ratio.

NOTE: During 3D Reform adjustment, "Screen Type" and "Screen Position" may not be available. To make available, first reset the 3D Reform data and then do settings again. Secondly repeat the 3D Reform adjustment. Changing "Screen Type" and "Screen Position" can limit 3D Reform in its adjustable range.

Selecting Auto Functions

Focus:

When Auto Focus is enabled in the Auto Functions menu, Auto Fo- cus can be executed by pressing and holding the AUTO ADJUST or AUTO ADJ button for a minimum of 2 seconds.

Wall Color Correction:

When Wall Color Correction is enabled in the Auto Functions menu, Wall Color Correction can be executed by pressing and holding the AUTO ADJUST or AUTO ADJ button for a minimum of 2 seconds. Correction settings will be saved on "User 4 (AutoAdjustButton)".

3D Reform:

Auto 3D Reform automatically corrects distortion by sensing the out- line or outer frame of your screen with the projector’s built-in image sensor to project an image within the screen.

See page E-26.

NOTE:

1.If neither Focus or Wall Color Correction are enabled in the Auto Functions menu when you press and hold the AUTO ADJUST or AUTO ADJ button for a minimum of 2 seconds, the Auto Adjust function (Position/Clock/ Phase) will be performed instead of Auto Focus and Auto Wall Color Cor- rection.

2.Due to specifications of the image sensor on the projector, Auto Functions are effective to image sizes between 40" and 150"(diagonal). Also in some cases Auto Functions may not work correctly depending on projection conditions such as textured material of the screen or ambient light.

E-49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents MT1075/MT1065 Safety Cautions Lamp Replacement Fire and Shock PrecautionsWhats in the Box? For North America only MT1065 onlyTable of Contents Introduction Features youll enjoyIntroduction to the Projector Attaching the lens cap Part Names of the ProjectorCarrying the Projector Select Top FeaturesTerminal Panel Features On the screen using the Select Part Names of the Remote ControlSelect Remote Control Precautions Battery InstallationOperating Range for Wireless Remote Control Using the Remote Control in Wired OperationSetting Up the Screen and the Projector Installation and ConnectionsSelecting a Location Do not attempt to install the projector yourself Distance ChartThrow Distance and Screen Size Reflecting the ImageConnecting Your PC or Macintosh Computer When Viewing a DVI Digital SignalConnecting to RGB 2 in connectors Connecting Your PC with a DVI ConnectorTo connect Scart output RGB Connecting an External MonitorDVD player Connecting Your DVD PlayerConnecting the Supplied Power Cable Connecting Your VCR or Laser Disc PlayerTurning on the Projector Projecting AN Image Basic OperationUsing the Remote Control Adjusting the Picture Size and PositionAdjust the Tilt Foot Selecting a SourceUsing Auto Focus When using the remote control or cabinet buttonsFocus Use the Focus Button +/- to obtain the best focusConfirmation screen is displayed When using the USB connected to the projectorUsing the Laser Pointer Turning Up or Down VolumeAdjusting the Image Using Auto Adjust Optimizing RGB Picture AutomaticallyTurning off the Projector Setting the function switchTo turn off the projector Using the Remote Mouse Function Convenient FeaturesAuto 3D Reform Executing the Auto 3D Reform featureAdjustment Setting Screen of Auto 3D ReformFreezing a Picture Using the PointerGetting the On-line Help Operate the Menus using the USB mouse Using a USB Mouse Using the USB HUB FunctionUsing the middle button on the mouse Making Freehand Drawings on a Projected Image ChalkBoard Changing Background LogoUSB Memory Device or USB Memory Card Reader Support Making the Most out of the Viewer Function Using the ViewerOperating the Viewer Function from the Projector playback When the tool bar is not displayedProjecting slides Viewer Switching to Slides Directly from Other Input Modes Auto Play ModeViewing Digital Images PreparationsDeleting Captured Images Using the PC Card Files Fucntion PC Card FilesTo delete captured images Using the Menus Using ON-SCREEN MenuDefault Custom Menu items are Basic Menu OperationAdvanced Menu Menu treeDefault Source Select Operation Mode SelectCommunication Speed WEP Menu Elements Menu Descriptions & Functions Entering Alphanumeric Characters by Using the MenuSource Select Picture not available for Viewer and LAN Entry Edit CommandSound Image OptionsPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup Resolution manually User can adjust the image display functions HoriSelecting Lamp Mode and Lamp Type Lamp Setting Selecting Auto Functions Selecting Aspect Ratio and Position for Screen ScreenNetwork Type required for wireless only Setting LAN ModeNications may be monitored by someone WEP for Wireless onlyUses 64-bit datalength for secure transmission Pared to use of 64bit datalength encryptionStatus Setting a PasswordEntry DeleteSecurity To enable Security, use the SelectTo delete PC card data you registered Tools Returning to Factory DefaultHelp Replacing the Lamp MaintenanceTo replace the lamp Cleaning or Replacing the Filter CleaningCleaning the Cabinet and the Lens Vacuum the filter-through the filter coverPower Indicator TroubleshootingStatus Indicator Lamp IndicatorImage isn’t square to Common Problems & Solutions Check These ItemsFor more information contact your dealer Page Model Number MT1075 Optical SpecificationsModel Number MT1065 Optical Pin Assignments of D-Sub RGB Input Connector Cabinet DimensionsMini D-Sub 15 Pin Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List Using Software Keyboard PC Control Connector D-SUB 9PPC Control Codes and Cable Connection Cable ConnectionOverview Operation Using an Http BrowserPreparation Before Use Handling of the Address for Operation via a BrowserServices offered with TravelCare TravelCare a service for international travelersTerm of warranty TravelCare GuideKuala Lumpur, Malaysia Asia and Middle EastApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

MT1075/MT1065 specifications

The NEC MT1075 and MT1065 are high-quality projectors that cater to various presentation needs, making them popular choices in both business and educational settings. Known for their impressive specifications and features, these models deliver outstanding performance, complemented by advanced technologies.

One of the standout features of the NEC MT1075 and MT1065 is their brightness. The MT1075 boasts a luminous output of 3700 ANSI lumens, while the MT1065 offers a slightly lower output of 3600 ANSI lumens. This high brightness level ensures that images remain clear and vivid, even in well-lit environments, making them suitable for large auditoriums, classrooms, and conference rooms.

These projectors employ DLP (Digital Light Processing) technology, which enhances image quality by providing sharp, vibrant colors and high contrast ratios. DLP technology ensures that moving images appear smooth and free from motion blur, making these projectors ideal for displaying videos, animations, and dynamic presentations. The MT1075 and MT1065 also support various resolution formats, with their native SVGA (800 x 600) resolution able to accommodate higher resolutions with clarity.

Another significant characteristic of these projectors is their connectivity options. Both models offer a range of input ports, including VGA, composite video, and S-Video, ensuring compatibility with multiple devices such as laptops, DVD players, and gaming consoles. Additionally, they feature audio input and built-in speakers, providing a complete multimedia experience.

The lightweight design of the NEC MT1075 and MT1065 enhances portability, making them easy to transport and set up in different locations. Their built-in features, such as keystone correction and manual zoom, provide flexibility in positioning the projectors and adjusting the image to fit various screen sizes.

Energy efficiency is another important aspect of the NEC MT1075 and MT1065. Both models utilize advanced lamp technology that ensures long-lasting performance, reducing the frequency of lamp replacements and associated maintenance costs.

Overall, the NEC MT1075 and MT1065 projectors are versatile and reliable, making them suitable for a wide range of applications. Their combination of brightness, advanced DLP technology, connectivity options, and user-friendly features make them an excellent choice for professionals and educators looking to make impactful presentations. With their durability and enhanced image quality, the MT1075 and MT1065 stand out in the competitive projector market.
Top Page Image Contents